Specialty Distraction Devices for Training (These are not Destructive Devices - No NFA Transfers required) Restricted Sales to Governmental Agencies Only - Official PO required
CTS Flash-Bang Training System
The system is made up of a Model 7290T reusable steel and aluminum body and a M201FB replacement training fuze.
The Training Flash-Bang produces a bang of 120dB and a
flash of well under ten thousand candela. In comparison, the CTS Model 7290 Tactical Flash-Bang produces 175dB and
4-6 million candela.
You do
not have to fear of repeated exposure to High Pressure
waves of energy weakening and fracturing the Bang body
causeing catistrophic failure and injuries. The Training Flash-Bang was developed at the request of the Department of Energy (DOE). Officers protecting DOE installations train so frequently that repeated exposure to 175dB became an OSHA issue. The solution was to develop a flash-bang with a decibel level of only 120 db. This is an extremely cost-effective training tool as compared to utilizing "LIVE" Flash Bangs. Replacement Fuzes are sold in lots of 35. For a bigger savings, order our FLASH-BANG Training Kit consisting of:~70 Fuze Reloads & one Steel Body.
ALL Training
Munitions come with a Left-Hand Thread to prevent
mixing Deployable Fused Head on Training Bodies &
visa versa
CTS 7290T Training Flash Bang
The new Model 7200 training system provides an excellent training device. It is built and weighs exactly the same as our Model 7290 Flash-Bang, but has no flash charge. The 7290T body is painted with a bright blue coating, and it can be used an unlimited number of times. The M201FB fuze for this system has 10 times the output of a normal M201 fuze and it is threaded with a left hand thread so it can not be accidentally used in any other munitions. The Model 7200 produces an output of about 120db.
Output 120 db @ 5 Feet
Safety
Our 7200 Flash-Bang come standard with our pull ring
safety clip, which retains the pull ring against the
fuze body. Releasing the pull ring requires a
clockwise twist before pulling the pin.
NEVER TRAIN
THAT A MIS-DEPLOYED FLASH-BANG CAN HAVE IT'S PIN
REPLACED.
TOSS IT IN A PRE-POSITIONED SAFETY BOX
Danger These devices are for training purposes only.
Physical Specifications
Flash Ports
Overall Weight
Overall Height
Diameter
10 on top & 10 on bottom
655g (21oz)
147.65mm (5.8")
50.9mm (2.0")
Fuze Type
Model 201T Left Hand Thread, Pyrotechnic Delay
Fuze delay
1.5 +0.3 sec
CTS-7290T Training Flash-Bang
CTS-7290T Training Flash-Bang Kit
CTS 7290TM Training Mini Flash Bang
Description The new Model 7200M training system provides an excellent training device. It is built and weighs exactly the same as our Model 7290M Mini Flash-Bang, but has no flash charge. The 7290TM body is painted with a bright blue coating, and it can be used an unlimited number of times. The M201FB fuze for this system has 10 times the output of a normal M201 fuze and it is threaded with a left hand thread so it can not be accidentally used in any other munitions. The Model 7200M produces an output of about 120db. The base contains a standard 3/8-16 UNC thread at its center allowing attachment of numerous accessories, including: Clamp, Stake, Eye Bolt or Magnet
Output 120 db @ 5 Feet
Safety Our 7200 Flash-Bang products come standard with our pull ring safety clip, which retains the pull ring against the fuze body. Releasing the pull ring requires a clockwise twist before pulling the pin. The pull ring can easily be reinserted to the safe position if the pin has not been removed.
Danger These devices are for training purposes only.
Physical Specifications
Flash Ports
Overall Weight
Overall Height
Diameter
10 on top & 10 on bottom
424g (13.6oz)
136.6mm (5.38")
38.4mm (1.5")
Fuze Type
Model 201T Left Hand Thread, Pyrotechnic delay
Fuze Delay
1.5 ±0.3 sec
7290MT Mini Training Flash Bang Body
CTS-7290TM Mini Training Flash Bang Kit
Sting-Ball Training System 9590T This grenade is constructed to replicate a "LIVE" Sting-Ball Grenade. The Fuze utilized is the same unit as included with our 7290T & 7290TM Training Flash-Bangs.
When thrown, this Training Grenade bounces just as a "LIVE" Sting-Ball Grenade does. This unit does not contain any irritants.
Applied Tactical Technologies, Inc. PO Box 268, Babylon NY 11702-0268 USA (800)223-1204 ATT-TACTICAL™ DOES NOT SELL TO OR DEAL WITH THE CIVILIAN MARKET, INDIVIDUALS, OR FFL DEALERS. ATT-TACTICAL™ ONLY DEALS WITH, ISSUES QUOTES TO, AND SELLS TO FEDERAL, STATE, AND LOCAL LAW ENFORCEMENT AGENCIES, IAFFILIATED
GOVERNMENT AGENCIES, US MILITARY, AFFILIATED TRAINING FACILITIES (Particular item restrictions apply)
Legal Disclaimer The information at att-tactical.com does not in any way constitute legal or professional advice and att-tactical.com cannot be held liable for actions arising from its use. we accept no liability for any loss or damages, consequential or otherwise, incurred in the reliance of the materials contained within. ATT-Tactical does not guarantee that the information provided herein is free from errors as the BATFE is often fluid in their definitions, descriptives, interpretations, readings, understandings and/or enforcement of federal and/or state laws.
Private Use Only In total of all content of this internet entity is not intended for public purview or examination. This is an internal information and corporate records storage device intended for viewing by agents, employees and/or representatives of this website's owner of record. No other use by anyone else is authorized. In addition, att-tactical.com cannot be held responsible for the contents of any externally linked pages or the actions taken by any entity which views this information. Any and all pricing shown is for internal use only, is not an offer to sell, deliver, send, ship or trade and subject to change without notice.
ITAR Clause You may access information on this site which may contain technical data as defined in the International Traffic in Arms Regulations ITAR at 22 CFR 120.10. The technical data provided comes under the purview of U.S. export regulations including the Arms Export Control Act (title 22, U.S.C., sec. 2751, et seq.) or the Export Administration Act of 1979, as amended,(title 50, U.S.C., app. 2401, et seq.).
Office of Foreign Assets Control (OFAC) Export Administration Regulations (EAR) By accessing this site, you acknowledge that such restricted technical data may not be exported, disclosed, or transferred to any foreign person, as defined in the ITAR at 22 CFR 120.16, without first complying with all the requirements of the ITAR (22 CFR 120-130) including requirements for obtaining any required export authority.
Counterfeit Parts Mitigation We are in full compliance with both the American Recovery and Reinvestment Act and the Trade Agreements Act regarding identifying, segregating and removing counterfeit parts from our supply chain. We insure our dealers and lower tier suppliers are also in compliance.
Pending Patents, Trade Marks, Copyrights and Intellectual Property Unless otherwise noted, all materials, including all of the text, page headers, images, illustrations, graphics, photographs, written and other materials that appear as part of this Catalog (collectively, the "Content") are subject to trademark, service mark, trade dress, copyright, and/or other intellectual property rights or licenses held by Applied Tactical Technologies, Inc., one of its affiliates, or by third parties who have licensed their materials to Applied Tactical Technologies, Inc.,. Furthermore, certain products in this Catalog are subject to patent protection under patent law, including both, utility and design patent protection, as well as trade dress, copyright, and other intellectual property laws.
Witness
The entire Content of this Catalog is copyrighted as a collective work under U.S. copyright laws, and Applied Tactical Technologies, Inc., owns a copyright in the selection, coordination, arrangement, and enhancement of the Content. The Catalog as a whole is protected by copyright and trade dress, all worldwide rights, titles and interests in and to which are owned by Applied Tactical Technologies, Inc. The Content of the Catalog, and the Catalog as a whole, are intended solely for personal, noncommercial (other than for the purchase of merchandise from this Catalog) use by the users of our Catalog. Applied Tactical Technologies, Inc., reserves complete title and full intellectual property rights in any Content you copy from this Catalog. Except as noted above, you may not copy, reproduce, modify, publish, distribute, display, transmit, transfer, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Content of this Catalog.