ATT-Tactical- Serving Warfighters and Crimefighters since 1985
US Dept. of State  ITAR / DDTC Registered  Manufacturer  / DUNS 96-648-0345  / CAGE 3BNS6
NYS Vender ID # 1000034176  / NJS Vender ID # 13262250 / GML 103
NYS & NJS Registered Explosives Mfgr / Dealer  §478.99(d) Armor Piercing Ammunition
FAR, FAR2 and SOP 00 11 -Compliant  / WAWF - Compliant / IPP - Compliant  / BAA & TAA Compliant
Defense Contractor since 1994

Number of Unique Visitors

Explosive Breaching Supplies 

Military Sales
Federal Sales
Contractor Sales
Municipal Sales
Tribal Sales
LEO Sales
Civilian Sales
Foreign Sales
TV & Movie
Firearms Division
TV & Movie
Prop Armor Division


Governmental Entities Only:

We can supply explosives and detonators in any amount. Product must be drop-shipped to your department's magazine. Truck freight is very expensive so plan your orders well in advance. If possible pool your order with another agency in your region to spread the freight rates across the entire order.

Explosives orders cannot be third-party. All entities involved in the transaction of explosives MUST possess the federal licenses for the type of explosives being transacted. Other LE equipment dealers cannot broker the transaction unless they too are federally licensed for explosives, in compliance with government mandated standards: DoD 4145.26M and DoD 6055.9-STD

Shippable High Explosives - DOT Class 1.4
Detonating Cord - 18 to 200 grainNONEL Shock TubeNONEL Blasting Caps
High Energy Liquid Explosive - HELIXDemolition Explosive Slurry - DEXSK-9 Training Aids
DOT Class 1.1
C4RDX CoreCopper Linear Shaped Charges
Composition A-5Composition BAmmonium Chlorate
Specialty Breaching Devices
Single & Duel Starter Devices, both Shotgun 209 & Capacitive Discharge
Hydro-load Breaching Frames, Blocks and Bottles

Remember that the BATFE recognizes any amount over 0 (zero) pounds as requiring a rated magazine for storage. You must have a federally certified magazine to receive any amount of explosives. This includes law enforcement agencies!
Do not even call us unless you possess all the required paperwork and a magazine!!!!

ABF Freight Systems, Inc.

Rules And Special Service Charges (ABF 111-X )

Effective: 04/03/2009 Item 612 : Minimum Charge on Class A or B Explosives. The minimum charge for a shipment containing Class A or B explosives as described in American Trucking Associations, Inc., Agent, Hazardous Materials Tariff STB ATA 111, will be the charge for 7,500 pounds at the applicable class scale L5C rate, applying to the highest rated Class A or other than Class A explosive in the shipment.



Explosives Products List

Subject to change without notice due to availability

Pricing will only be provided when requested via agency letterhead


All Orders: Must be on official gov't purchase order. Must include a statement of use for official purposes only.

FOB W. Memphis, AR / FOB Long Island NY




Shippable High Explosives, DOT Class 1.4

C-4 Plastic Explosive, 20 gram vial Net Explosive Weight per box is 1.06 lb..
Box of 24

Sheet Explosive, 20 grams (.042" x 4" x5") 1 gram per square inch (C-1)

Box of 24
Sheet Explosive, 20 grams (.062" x 2.7"x5") 1.5 gram per square inch (C-1)
Box of 24

TNT, Granular 20 gram unit (Packed in Mylar bag)

Box of 24
Detonating Cord, 200 gain per foot (18.5" long section, 20 gram Net Explosive Weight)
Especially designed for the Mineral Water Disrupter
Box of 5
Note: The above items may be shipped via common carriers as a 1.4 Explosive. Write for shipping quote.
All Orders: Must be on official gov't purchase order. Must include a statement of use for official purposes only.
When delivery is urgent, FedEx Express Overnight Air Service is available for an additional $350 handling fee.
FOB W. Memphis

Binary Explosives

HELIX™ (High Energy Liquid Explosive) **Instant Arming** Charges in plastic sticks.
Liquid & Activator Components Included. 1 3/8" x 8" each
Case of 72 Sticks
Other Configurations Available
OmniMAXX™ 1.5 lb. Dam Buster. 65 pound case **Instant Arming** No Waiting for liquid to absorb. Very Powerful
Case of 36

Important Note: The above items may be shipped via common carriers. Write for shipping quote.
All Orders: Must be on official gov't purchase order. Must include a statement of use for official purposes only.
FOB W. Memphis

Copper Linear Shaped Charges, DOT Class 1.1

Linear Shaped Charge, Copper, RDX Core 125 grain/ft
Penetration (steel) = .30" with .20" standoff/font>
4 ft Section
Linear Shaped Charge, Copper, RDX Core 250 grain/ft
Penetration (steel) = .40" with .35" standoff
4 ft Section
Linear Shaped Charge, Copper, RDX Core 400 grain/ft
Penetration (steel) = .55" with .37" standoff/font>
4 ft Section
Linear Shaped Charge, Copper, RDX Core 600 grain/ft
Penetration (steel) = .70" with .60" standoff/font>
4 ft Section
Linear Shaped Charge, Copper, RDX Core 900 grain/ft
Penetration (steel) = .85" with .66" standoff
LSC-C-900-4FT4 ft Section
Custom Lengths: There is a $5.00 cutting fee for each cut on special order lengths of linear./div>

Important Note: These materials are DOT Class 1.1D and cannot be economically shipped. Shipping averages above $10.00 a mile with a $10,000 minimum.
Please write for a shipping quote or you can arrange to pick up your order at one of our Facility Magazines.
All Orders: Must be on official gov't purchase order. Must include a statement of use for official purposes only.
FOB W. Memphis

Omni™ Breach Systems
(Water Charge containers for metal door breaching)

One (1) foot long section of 2" x 4" Omni™ Breach Bottle,
16 pairs

K-9 Training Aids
(These products are not for sale to non-governmental entities, i.e. private K-9 schools)
All Orders:
Must be on official gov't purchase order. Must include a statement of use for official purposes only.
FOB W Memphis / FOB Long Island NY

Black Powder, Elephant Brand
1 lb Can
CC-4, Bulk (91% RDX, 9% Plasticizer)
C-4, M112 Block, 1.25 LB pressed
Composition B (60% RDX, 40% TNT)
Detonating Cord, PETN, 50 gr./ft
100 Ft
Pyrodex RS, Hodgdon Brand
Sheet Explosive, PETN Based
Smokeless Powder (Bulls Eye)
1 LB Can
Safety Fuse (Black Powder Core)
100 Ft
A-5 (98.5% RDX, 1.5% Steric Acid)
Additional Discounts on multiple unit orders of below per item
Ammonium Nitrate / Fuel Oil (ANFO)
Ammonium Nitrate (1 LB Kinepak Solid)
Ammonium Nitrate Prills
Cast Booster, PETN/TNT/RDX/HMX
1/3 LB
Dynamite, Unigel 1 1/4" x 8" Stick
Stick (1/2 LB)
Emulsion Explosive Dyno AP
Stick (1/2 LB)
Nitromethane (liquid for binaries)
Watergel, SEC Detagel, 1 1/2" x 8" Stick
Stick (1/2 LB)
TNT, Granular

Important Note: K-9 Training Products are packaged differently than our other explosives. Special care is taken to avoid cross contamination. Each item (odor) is packed separately in its own box. Each box is labeled with DOT Markings (including Proper Shipping Name, Orange Diamond, DOT Class and UN Number) weight of each item, etc.
Shipping Information: Shipping many of these items is very difficult and expensive. Due to this, most K-9 orders are picked up at one of our facility magazines.

Other Products available
TNT, Granular Pound#TN00A
Composition B Pound#CB00A
Composition C-4 Plastic Explosive Pound #CP04A
Sheet Exp., PETN based1/16" thickPound (2 sq.ft.)#SE00A
DEXS Caulk Explosive One pound tube/td> #DX01A
Booster, Slip on,20 gramCase of 200#DP20A
Detonating Cord
Detonating Cord7.5 Grain / Ft100 ft Roll#DC07B
Detonating Cord10.5 Grain / Ft100 ft Roll#DC01B
Detonating Cord15 Grain / Ft1000 ft Roll#DC15A
Detonating Cord25 Grain / Ft1000 ft Roll#DC25A
Detonating Cord25 Grain / Ft100 ft Roll#DC25B
Detonating Cord50 Grain / Ft1000 ft Roll#DC50A
Detonating Cord50 Grain / Ft100 ft Roll#DC50B
Detonating Cord100 Grain / Ft2000 ft Roll#DC10A
Detonating Cord100 Grain / Ft100 ft Roll#DC10B
Minimum Order of Det Cord: 100 ft. roll
Nonel Type Blasting Caps and Accessories
Blasting Cap, Nonel, 16 ft.100ms delayCase of 60#BN16A
Blasting Cap, Nonel, 16 ft.100ms delayEach#BN16B
Blasting Cap. Nonel, 16 ft.0 sec delay/td> Each#BN16E
Minimum Order of Nonel Blasting Caps, shipped: Box of 60 of each
Nonel Lead Line 2500 ft. roll#NL25A
Nonel Lead Line 250 ft. roll


Minimum Order of Nonel lead line: 2500 ft.   
Ignition System
Elec. Hand Starter Capacitive Discharge for NonelATT/HR1



Storage of Breaching Explosives Aboard SWAT/ERT Trucks

27 CFR 555.141: EXEMPTIONS

Under specific conditions, State and local bomb technicians and explosives response teams may store a limited amount of explosive materials within official response vehicles.

ATF Rul. 2009-3
The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) has received requests from State and local law enforcement agencies to store explosive materials overnight in official response vehicles. The agencies assert that authorization for this alternate storage procedure would increase public safety and ensure that their responses to critical incidents are conducted more efficiently. Explosive storage magazines are often located several miles away from a response vehicle’s location. Without a storage variance, prior to reporting to a critical incident, State and local bomb technicians and explosives response teams are often required first to travel to the explosive storage magazine location, retrieve the necessary explosive materials required to perform their duties, and then proceed to the incident scene. This situation may hinder the agency’s ability to rapidly respond to critical incidents.

Under Title 18, United States Code (U.S.C.), Section 842(j), all persons must store explosive materials in compliance with the regulations issued by the Attorney General.

The Attorney General has delegated the authority to administer and enforce the Federal explosives laws to the Director, ATF. The regulations contained within Title 27, Code of Federal Regulations (CFR), Part 555 implement the provisions of the Federal explosives laws. Section 555.205 provides that all explosive materials must be kept in locked magazines meeting the standards in Part 555, Subpart K, unless they are in the process of manufacture, being physically handled in the operating process of a licensee or user, being used, or being transported to a place of storage or use by a licensee or permittee or by a person who has lawfully acquired explosive materials under Section 555.106. State and local governments are not exempt from the requirement to store explosives in conformity with ATF regulations.

The regulations at 27 CFR 555.22 allow the Director, ATF, to approve the use of an
alternate method or procedure in lieu of a method or procedure specifically prescribed in Part 555. ATF may approve an alternate method or procedure when:
(1) Good cause is shown for the use of the alternate method or procedure;
(2) The alternate method or procedure is within the purpose of, and consistent with the effect intended by, the specifically prescribed method or procedure and that the alternate method or procedure is substantially equivalent to that specifically prescribed method or procedure; and
(3) The alternate method or procedure will not be contrary to any provision of law and will not result in an increase in cost to the Government or hinder the effective administration of 27CFR Part 555.

ATF finds that, provided certain conditions are met, there is good cause for authorizing storage of explosive materials in official response vehicles. For purposes of this ruling, the term “official response vehicle” is limited to State and local law enforcement department issued vehicles specially designated for use by bomb technicians and explosives response teams. Allowing State and local bomb technicians and explosives response personnel the flexibility to store explosive materials overnight in official response vehicles, whether or not attended, would increase public safety and facilitate quick and efficient incident response and law enforcement operations.

In addition, ATF finds that the additional security protocols provided in this ruling, such as enhanced storage security features, limited overall explosive materials load, magazine inspections, and increased inventory requirements are consistent with the effect intended by, and are substantially equivalent to, the specifically prescribed methods and procedures prescribed in Part 555, Subpart K.

Further, this alternate method is not contrary to any provision of law, will not increase costs to ATF, and will not hinder the effective administration of the regulations. Held, State and local bomb technicians and explosives response teams may store explosive materials in official response vehicles parked inside a secured building, provided the conditions set forth below are met at all times. A building is considered “secured” if it is a law enforcement or other government facility not accessible by unauthorized personnel. A secured building has law enforcement or other government personnel present at all times, or the building has an additional security feature such as an alarm, camera, or card entry system.

(1) Official response vehicles and buildings must be locked and secured at all times when not in use; and
(2) No more than 50 pounds Net Explosives Weight total may be stored in each building. This means that the combined Net Explosives Weight stored in official response vehicles and other explosives storage magazines located in the building may not exceed 50 pounds. Note that the Net Explosives Weight of explosive materials stored is not to be confused with the TNT equivalency weight of explosive materials.

Held further,
State and local bomb technicians and explosives response teams may store explosive materials in unattended, official response vehicles parked at an outdoor location, provided the conditions set forth below are met at all times. The outdoor location may be an unsecured area accessible by civilians or unauthorized personnel.

(1) When not in use, official response vehicles must be locked at all times and have at least one additional security feature, such as a vehicle alarm, vehicle tracking device, or vehicle immobilization mechanism, or other equivalent alternative; and

(2) Official response vehicles located at an outdoor location may not store explosive materials in excess of:

a. 20 detonators (electric, non-electric, or electronic); and

b. 2.5 pounds Net Explosives Weight of all other explosive materials.

Note that the above list does not limit the amount of disruptor ammunition or unmixed binary explosives carried on a response vehicle.

Held further, all State and local law enforcement agencies intending to store explosive materials in official response vehicles, whether attended or unattended, must meet the following criteria at all times:

(1) Explosive materials must be stored in at least a Type-3 magazine;

(2) Magazines must be secured with one steel padlock (which need not be protected
by a steel hood) having at least five tumblers and a case-hardened shackle of at least 3/8-inch diameter. Alternatively, the magazine may be secured by placing it inside a locked compartment within the vehicle designed to meet law enforcement construction standards for weapons storage within the vehicle;

(3) Agencies must securely bolt or otherwise affix the magazines, or the locked compartments in which the magazines are stored, to the vehicle. Nuts must be located on the inside of the magazine or compartment where they cannot be removed from the outside. The nuts must be covered with a non-sparking material, such as epoxy paint or plywood;

(4) If a magazine placed in a vehicle uses a secondary locking system containing a chain or cable and a padlock, the agency need not bolt it to the trunk or cargo area of the vehicle or lock it with one steel padlock. Rather, the agency must close and stabilize the magazine securely within the trunk or cargo area of the vehicle using the secondary lock’s chain or cable and padlock;

(5) Agencies may store detonators in the same magazine as delay devices, electric squibs, safety fuse, igniters, igniter cord, and shock tube, but not in the same magazine with other explosive materials;

(6) Agencies may not store any amount of loose or free-flowing explosive powders, irrespective of the packaging configuration. This does not prohibit the transport of necessary amounts of black or smokeless powders for use at specifically planned operations or the transport of seized black or smokeless powders as a result of operations;

(7) Agencies may not store any tools or other metal devices in the same magazine as
the explosive materials;

(8) Officers storing explosive materials within official response vehicles must maintain an inventory storage record. The record must contain the name of the explosive material’s manufacturer, the quantity on hand, and the dates that the materials are received, removed, or used. Officers must maintain a copy of this record within the vehicle and at an off-site location, such as with the Bomb Squad Commander;

(9) Officers must conduct a quarterly inventory of the explosive materials on hand and compare it to the inventory storage record. Officers must note this inventory in the inventory storage record;

(10) Officers must inspect the magazine once every 7 days to determine whether there has been any attempted or unauthorized entry into the magazine, or unauthorized removal of the contents stored in the magazine; and

(11) In the event of the theft or loss of explosive materials, law enforcement officers
must report the theft or loss to ATF within 24 hours of discovery by calling 1-800-800-3855 and completing an ATF Form 5400.5, Report of Theft or Loss of Explosive Materials. You may obtain this form from the ATF Distribution Center by calling 301-583-4696, or through the ATF website at

Any other alternate methods or procedures not permitted by this ruling may be requested through a variance request addressed to the ATF Explosives Industry Programs Branch ((EIPB). Requests may be made by sending an email to EIPB@ATF.GOV or letter to:

Explosives Industry Programs Branch, Bureau of Alcohol, Tobacco, Firearms and Explosives
                                        99 New York Avenue, NE.
                                        Mailstop 6E403
                                       Washington, DC 20226

To request a copy of ATF’s Federal Explosives Laws and Regulations, ATF P 5400.7, you may contact the ATF Distribution Center at 301-583-4696, or your local ATF office. You may also download a copy of this publication from ATF’s website at

Date approved: June 19, 2009
Kenneth E. Melson

Acting Director


2009 ATF Explosives Industry Newsletter

Day Boxes

ATF conducts an annual review of all explosive materials thefts that have occurred throughout the nation. Through ATF’s evaluation, explosives licensees and permittees who were victims of such thefts have indicated that many of these crimes, and their accompanying financial loss, could have been avoided by ensuring their adherence to Federal explosives storage regulations. For example, in 2007, 16 detonators were stolen from a day box left unattended overnight in a vehicle.

Federal explosives regulations at 27 CFR 555.203 allow for the temporary, attended storage of high explosives in a type 3 magazine, also known as a “day-box”. These magazines must be fire-resistant, weather-resistant, and theft-resistant. However, while 27 CFR 555.209 provides details concerning construction and locking requirements, using a proper lock may only protect a day-box from unwanted entry. A proper lock will not prevent theft of the day-box itself. During inspections, ATF has discovered explosives that were left in unattended day-boxes for days or weeks at a time. Explosive materials may not be stored unattended in type 3 magazines but must be removed to type 1 or type 2 magazines for unattended storage. The practice of storing explosives in an unattended day-box is not only a violation of Federal explosives regulations, but it also exposes the day-box and the explosives stored therein to theft and illegal use.


Recording Explosive Materials “Used”

Federal regulations at 27 CFR 555.123(d) require licensed manufacturers who manufacture explosive materials for their own use to enter in a separate record, not later than the close of the next business day following the date of use: (1) the date of use; (2) the quantity (in applicable quantity units); and (3) a description of the explosive materials used. This record is separate and distinct from the disposition record requirements for explosive materials under 555.123(c).

However, licensed manufacturers are exempt from the 555.123(d) recordkeeping requirement if the explosive materials are manufactured for the licensee’s own use and are used within a 24 hour period at the same site.

Similarly, regulations at 27 CFR 555.124(c) require licensed dealers to record in a separate record any explosive materials used by the dealer, not later than the close of the next business day following the date of use by the dealer. This record must include: (1) the date of use; (2) the name or brand name of the manufacturer and name of importer (if any); (3) the manufacturer’s marks of identification; (4) the quantity (in applicable quantity units); and (5) a description of the explosive materials used. Licensees with questions about their particular recordkeeping requirements should contact their local ATF office.

ATF Notice Re-Binary Exploding Target Compounds

ATF has recently received inquiries about the applicability of the Federal explosives law to binary exploding targets.

The components of these binary targets (typically an oxidizer like ammonium nitrate and a fuel such as aluminum or another metal-based powder) are not separately listed on the List of Explosive Materials and do not meet the definition of “Explosives” in 27 CFR 555.11. Therefore, ATF does not regulate the sale and distribution of these component chemicals, even when sold together in binary target “kits.”

However, when the binary components are combined, the resulting mixture is an explosive material subject to all requirements of 18 U.S.C. Chapter 40 and 27 CFR Part 555. Accordingly, all such exploding targets must be stored in an explosives storage magazine as prescribed in the regulations found in 27 CFR, Part 555, Subpart K — Storage, unless they are in the process of being used.

Further, mixing the binary components together constitutes manufacturing explosives. Persons manufacturing explosives for their own personal, non-business use only (e.g., personal target practice) are not required to have a Federal explosives license or permit. However, individuals or companies must obtain a Federal explosives manufacturing license if they intend to engage in the business of manufacturing explosives for sale or distribution, or for their own business use. Such business uses include manufacturing binary targets for demonstration or product testing purposes.

Licensed manufacturers of exploding targets are subject to Federal recordkeeping requirements and must comply with regulations concerning records of manufacture or acquisition, distribution, exportation, use, inventory and daily summaries of magazine transactions found in 27 CFR, Part 555, Subpart G—Records and Reports.

In addition, a Federal explosives license or permit is required for the transport of explosive materials. Therefore, a person must obtain a Federal explosives license or permit if they mix binary exploding targets and subsequently transport them to a shooting range or to any other location. For further information, please contact the Explosives Industry Programs Branch at eipb [at] or (202) 648-7120.


Explosives Shipping and Ordering Information

Effective: January 1st, 2009, Federal laws regarding transfer are changing everyday so please check with us before you order.

Minimum Order Quantities:
•Minimum order quantities are as quoted per product list. We are unable to break cases.
K9 ORDERS: Please see special K9 products list.

Appointments and Pickups:
•A scheduled appointment and a minimum 24 hour notice after all required paperwork is submitted, is required for all customer pickup orders. Pickups must be scheduled at least 5 working days in advance. The earliest pickup time is 10:00 am - Please don't come earlier than 10 am. See notes under Legalities.

•For record keeping purposes, we prefer invoices to be paid by government credit card or government purchase order. MasterCard and Visa are accepted. Your cooperation is appreciated.
•A $500.00 handling fee per order, over and above the standard shipping charge, will be charged for all overnight and air shipments of hazardous goods. Several of our products, including all DOT Class 1.1 explosives, cannot be shipped by air
•Terms of payment. Upon receipt of goods (Net on Delivery) unless otherwise agreed prior to order.
•As required, all orders of explosives not paid for within 30 days will be reported to the Bureau of Alcohol, Tobacco, Firearms and Explosives, and the Federal Bureau of Investigation as stolen.
•All pricing for products that are "in-stock" or "ordered- for pick up" at our Long Island NY Facility Magazine are priced 25% higher due to additional Transportation charges required by NYC/NYS. This works out to be approximately the same costs as to drive to our Memphis Facility Magazine and pick up your order there.

Time Frame:
The sale and transfer of explosive products is not a "same-day" process. You should plan for your purchase to take several weeks due to federally required form filings as well as background checks for your designated employee who will be picking up your order.

•All purchasers of explosive products are subject to a background check.
• All prices quoted and listed are FOB Origin (W. Memphis AR. Facility Magazine or Long Island NY Facility Magazine) unless otherwise specified. Please request quotes for quantity discounts (i.e. hundred weight or truckload.)
•A Federal Explosives License is not required for governmental agencies. We can ship to any government agency upon receipt, via hard copy, of an official gov't agency purchase order or a written order on gov't agency letterhead.
• A federally registered Explosives Magazine rated for the explosives possessed is required by the gov't agency.
•With few exceptions, DOT Class 1.1 explosives will be sold only to government agencies. DOT Class 1.1 explosives cannot be shipped by UPS or FedEx. Very substantial shipping charges will be incurred if shipped by common carrier. It is highly preferred that the customer pick up the product at our Memphis Facility Magazine. Pick up at our Long Island NY Facility Magazine by governmental entities will require additional paperwork and must be allotted additional time before pickup appointment.
•Certain items on our price list are to be sold only to governmental agencies. Possession of our price list does not authorizes sale to non-governmental entities or individuals.
•The US Department of Transportation provides a waiver to government agencies transporting explosives in official vehicles for official purposes. Please ask for more information if you are planning on picking up your order.
•Persons picking up explosives on behalf of a government agency must be in an official gov't vehicle and must present proof of ID and employment with said agency.
•Shipments by Specialized Contract Carrier can be arraigned, but delivery must be made to an "approved magazine". It is highly recommenced that several agencies located in your general area pool orders so that one truck can deliver to all through one central delivery point (agency magazine) where further distribution can be made by that agency.
•Applied Tactical Technologies, Inc./ATT-Energetics, is not responsible for the use or misuse of the products sold. The end-user is responsible for the knowledge and adherence to all local, state and federal laws concerning the transportation, storage and use of all products purchased. Applied Tactical Technologies, Inc./ATT-Energetics offers regular training classes for the products offered through our Dynamic Entry Academy (DEA). It is the user's responsibility to obtain proper training through Applied Tactical Technologies, Inc./ATT-Energetics; Dynamic Entry Academy (DEA), or other bonifide training sources to insure safe handling and use of these products.
• Applied Tactical Technologies, Inc./ATT-Energetics; Dynamic Entry Academy (DEA), are not responsible for any third party injuries, and/or deaths. All moral, criminal and litigious responsibilities are those of the end-user only, and may not be reassigned.


DET-Cord Net Explosive Weight Chart























































































Search Query

Applied Tactical Technologies, Inc. PO Box 268, Babylon NY 11702-0268 USA (800)223-1204


Copyright Notice
©1994-2015 Applied Tactical Technologies, Inc. All Rights Reserved in Perpetuity.
att-tactical™ Panoply™ 8-Ball™ are trademarks in continuous use. The ATT-TACTICAL name, logo and related trademarks and service marks, owned by Applied Tactical Technologies, Inc., are registered and/or used in the United States and many foreign countries.  All other trademarks, service marks and trade names referenced in this site are the property of their respective owners. ANY USE, COPYING, OR REPRODUCTION OF THE TRADEMARKS, LOGOS, INFORMATION, IMAGES OR DESIGNS CONTAINED IN THIS SITE IS STRICTLY PROHIBITED WITHOUT THE PRIOR WRITTEN PERMISSION OF APPLIED TACTICAL TECHNOLOGIES, INC. seeks to ensure that all content and information published at this Web site is current and accurate but is not warranted.

Legal Disclaimer
The information at does not in any way constitute legal or professional advice and cannot be held liable for actions arising from its use. we accept no liability for any loss or damages, consequential or otherwise, incurred in the reliance of the materials contained within.
ATT-Tactical does not guarantee that the information provided herein is free from errors as the BATFE is often fluid in their definitions, descriptives, interpretations, readings, understandings and/or enforcement of federal and/or state laws.

Private Use Only
In total of all content of this internet entity is not intended for public purview or examination. This is an internal information and corporate records storage device intended for viewing by agents, employees and/or representatives of this website's owner of record. No other use by anyone else is authorized. In addition, cannot be held responsible for the contents of any externally linked pages or the actions taken by any entity which views this information. Any and all pricing shown is for internal use only, is not an offer to sell, deliver, send, ship or trade and subject to change without notice.  

ITAR Clause
You may access information on this site which may contain technical data as defined in the International Traffic in Arms Regulations ITAR at 22 CFR 120.10. The technical data provided comes under the purview of U.S. export regulations including the Arms Export Control Act (title 22, U.S.C., sec. 2751, et seq.) or the Export Administration Act of 1979, as amended,(title 50, U.S.C., app. 2401, et seq.).

Office of Foreign Assets Control (OFAC)  Export Administration Regulations (EAR)
By accessing this site, you acknowledge that such restricted technical data may not be exported, disclosed, or transferred to any foreign person, as defined in the ITAR at 22 CFR 120.16, without first complying with all the requirements of the ITAR (22 CFR 120-130) including requirements for obtaining any required export authority.      

Counterfeit Parts Mitigation
We are in full compliance with both the American Recovery and Reinvestment Act and the Trade Agreements Act regarding identifying, segregating and removing counterfeit parts from our supply chain. We insure our dealers and lower tier suppliers are also in compliance.

Pending Patents, Trade Marks, Copyrights and Intellectual Property
Unless otherwise noted, all materials, including all of the text, page headers, images, illustrations, graphics, photographs, written and other materials that appear as part of this Catalog (collectively, the "Content") are subject to trademark, service mark, trade dress, copyright, and/or other intellectual property rights or licenses held by Applied Tactical Technologies, Inc., one of its affiliates, or by third parties who have licensed their materials to Applied Tactical Technologies, Inc.,. Furthermore, certain products in this Catalog are subject to patent protection under patent law, including both, utility and design patent protection, as well as trade dress, copyright, and other intellectual property laws.  

The entire Content of this Catalog is copyrighted as a collective work under U.S. copyright laws, and Applied Tactical Technologies, Inc., owns a copyright in the selection, coordination, arrangement, and enhancement of the Content. The Catalog as a whole is protected by copyright and trade dress, all worldwide rights, titles and interests in and to which are owned by Applied Tactical Technologies, Inc. The Content of the Catalog, and the Catalog as a whole, are intended solely for personal, noncommercial (other than for the purchase of merchandise from this Catalog) use by the users of our Catalog. Applied Tactical Technologies, Inc., reserves complete title and full intellectual property rights in any Content you copy from this Catalog. Except as noted above, you may not copy, reproduce, modify, publish, distribute, display, transmit, transfer, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Content of this Catalog.