ATT-TACTICAL™ ATT-Tactical - Serving Warfighters and Crimefighters since 1985
US Dept. of State  ITAR / DDTC Registered  Manufacturer  / DUNS 96-648-0345  / CAGE 3BNS6
NYCPASS Port  SUP1646628 / NYS Vender ID # 1000034176  / NJS Vender ID # 13262250
NYS Explosives Mfgr - Dealer  / §478.99(d) Armor Piercing Ammunition /  AA&E Level 2 / GML 103
FAR, FAR2 and SOP 00 11 -Compliant  / WAWF - Compliant / IPP  - BAA - TAA Compliant,
 Federal Information Security Modernization Act (FISMA) Certified / SP 800-171
Defense Contractor since 1994
Home PageAbout ATTOur MissionContact

Ballistic Protective Inserts


 

Pistol Protective Special-Threat Plates
The Ultimate in Lightweight Armor Protection against Exotic Rounds.
The Special Threat Plate (STP) is a replacement for your vest's soft trauma plate. It is designed to drop-in to your outer pocket and adds negligible weight and movement restriction. Very efficient in defeating current handgun ammunition all by itself. Adds protection against the emerging crop of specialty pistols which fire ultra-high speed projectiles as well as SPIKE protection.
ATT-Tactical™ Special Threat Pistol Plate Female 

STP58SCFEMALE
Special Threat Plate

Handgun & Spike 

  • 100% Polyethylene Construction
  • Product of the U.S.A.
  • Single Curve to the Female Shape
  • 0.31" thick (Fits in your soft trauma plate pocket)
  • 47 Layers UHMWPE Proprietary Weave
  • Weight: 8oz.
  • Size: 5"x8"
ATT-Tactical™ Special Threat Pistol Plate 7x9 Male 

STP79MC
Special Threat Plate

Handgun & Spike

  • 100% Polyethylene Construction
  • Product of the U.S.A.
  • Triple Curve with Shooters-Cuts
  • 0.31" thick (Fits in your soft trauma plate pocket)
  • 47 Layers UHMWPE Proprietary Weave
  • Weight: 10oz.
  • Size: 7"x9"

 

ATT-Tactical™ Special Threat Pistol Plate 10x12 Male 

STP1012MC
Special Threat Plate

Handgun & Spike

  • Perfect size for Raid Vests or Low Viz Carriers
  • Product of the U.S.A.
  • 100% Polyethylene Construction
  • Triple Curve with Shooters-Cuts
  • 0.31" thick
  • 47 Layers UHMWPE Proprietary Weave
  • Weight: 14oz.
  • Size: 10"x12"
Special Threat Pistol Plate Ballistics
Stopped multiple hits of the following rounds when independently tested against NIJ 0108.01.
Threats defeated per NIJ 0108.01 Stand Alone

.357 Sig Speer
9mm Fiocchi
9mm Winchester Ranger
.40 cal Aquila IQ
Tokarev 7.62x25 Foreign
Tokarev 7,62x25 Sellier & Bellot
Tokarev 7.62x25 Norinco
FN 5.7x28
FN 5.7x28

125 gr GDHP @ 1410fps
115 gr FMJ @ 1150 fps
127 gr SXT+P+ @ 1250 fps
95 gr HP @ 1500 fps
85 gr FMJ (Steel Jacket) @ 1540 fps
85 gr FMJ (Steel Jacket) @ 1600 fps
85 gr FMJ (Steel Jacket) @ 1520 fps
40 gr JSP SS195 @ 2072 fps
40 gr V-Max SS197SR @ 1729 fps
Threats defeated per NIJ 0108.01 In Conjunction With (I.C.W.) a Level II Vest

.357 Sig Corbon
.30cal Carbine
12-Gauge Winchester rifled slug

115 gr JHP @ 1540 fps
110 gr FMJ @ 2030 fps
1-oz Hollow Point @1600 fps


Here is a video of our Special Threat Pistol Plate
being assaulted with a variety of commercially available pistol ammunition



Here is a video of our Special Threat Pistol Plate
being assaulted with Liberty Ammunition's 50gr 2000fps 9mm
& G2Research's 92gr 1265fps 9mm RIP Round

 
Light-Weight Combo Special Threat Plate
ATT-Tactical™ Special Threat ARAK Plate 7x9 Male

STP79MCARAK
Special Threat Plate

Handgun & Rifle Combo M193&M43
Protects your core !

  • 5.56x45mm M193 & 7.62x39 Mild Steel core
  • Least amount of Back face in the industry
    (3/8" from M193) for a concealable vest plate
  • Fits in most Quality Concealable Vest Trauma pockets
  • Product of the U.S.A.
  • 100% Polyethylene Construction
  • Triple Curve with Shooters-Cuts
  • 0.90" thick
  • 200 Layers UHMWPE Proprietary Weave
  • Weight: 32oz.
  • Size: 7"x9"

Here is a video of our Special Threat Combo Plate
being assaulted with 7.62x39MSC & M193 Ball
 
Rifle Protective Special-Threat Plates
High Durability, non-fragile, multi hit, and capable of reducing the amount of energy transferred to the operator
with each subsequent ballistic strike.
MIL-STD-3027, "Performance Requirements and Testing of Body Armor"
MIL-STD-662F - "V50 Ballistic Test for Armor"
ATT Rifle Plates

LEVEL III STAND ALONE

  • Advanced UHMWPE Design
  • This is our Active-Shooter Plate
  • (M80/M193)
  • Plate-Carrier Ready
  • Multi-Shot Rated /Single Curve
  • We are the maker of these plates !

BVP Reimbursable and Grant'able

NIJ 0101.06 Listed
Gamma Style Single CurveSmallLargeNIJ - 0101.06
Width x Length8.00" x 10.00"10.00" x 12.00"
Weight/Thickness2.0lbs/1.1"3.0lbs/1.1"
ATT Model3400S3400L
Weapon TypeAmmunitionStriking Velocity
Rifle SVD, Dragunov7.62x54R - L2850ft/s±30
Rifle FN FAL7.62x51mm - Ball2780ft/s±30
Rifle AK-477.62x39mm - Ball2410ft/s±30
Rifle M-16/AR-155.56x45mm - M1933025ft/s±30

LEVEL III STAND ALONE

  • Advanced UHMWPE Design
  • (M80/M193)
  • This is are Maritime Operations Plate
  • Neutrally Buoyant (Positive 15lbs in Pairs)
  • Multi-Shot Rated / Multi-Curve
  • We are the maker of these plates !

BVP Reimbursable and Grant'able

NIJ 0101.06 Listed
SAPI Style Multi-CurveSmallMediumLargeExtra Large
Width x Length8.75" x 11.75"9.5" x 12.5"10.25" x 13.25"11.0" x 14.0"
Weight/Thickness2.6lbs/1.1"3.0lbs/1.1"3.5lbs/1.1"3.8lbs/1.1"
ATT Model3600S3600M3600L3600XL
Swimmer Style Multi-CurveSmallMediumLargeExtra Large
Width x Length9.5" x 11.1"10.0" x 11.6"10.0" x 12.1"10.5" x 12.6"
Weight/Thickness2.5lbs/1.1"2.7lbs/1.1"2.9lbs/1.1"3.2lbs/1.1"
ATT Model3600SWS3600SWM3600SWL3600SWX
Side Plate Single-CurveSmallMediumLargeNIJ - 0101.06
Width x Length6.0" x 6.0"5.0" x 7.0"6.0" x 8.0"
Weight/Thickness0.9lbs/1.1"0.9lbs/1.1"1.3bs/1.1"
ATT Model3600SPS3600SPM3600SPL
Weapon TypeAmmunitionStriking Velocity
Rifle M-17.62x63mm - JSP2780ft/s±30
Rifle SVD, Dragunov7.62x54R - L2750ft/s±30
Rifle FN FAL7.62x51mm - Ball2780ft/s±30
Rifle AK-477.62x39mm - Ball2380ft/s±30
Rifle M-16/AR-155.56x45mm - M1932780ft/s±30

LEVEL III+ STAND ALONE

  • Light AP Protection
  • (5.56x45M193/7.62x39 AK-MSC)
  • This is our CONUS Special Threat Plate!
  • Advanced Ceramic/Composite Design
  • Multi-Shot Rated / Multi-Curve
  • We are the maker of these plates !

BVP Reimbursable and Grant'able

NIJ 0101.06 Listed
SAPI Style Multi-CurveSmallMediumLargeExtra Large
Width x Length8.75" x 11.75"9.5" x 12.5"10.25" x 13.25"11.0" x 14.0"
Weight/Thickness3.9lbs/1.1"4.6lbs/1.1"5.2lbs/1.1"5.8lbs/1.1"
ATT Model3610S3610M3610L3610XL
Swimmer Style Multi-CurveSmallMediumLargeExtra Large
Width x Length9.5" x 11.1"10.0" x 11.6"10.0" x 12.1"10.5" x 12.6"
Weight/Thickness3.7lbs/1.1"4.2lbs/1.1"4.3lbs/1.1"4.8lbs/1.1"
ATT Model3610SWS3610SWM3610SWL3610SWX
Side Plate Single-CurveSmallMediumLargeNIJ - 0101.06
Width x Length6.0" x 6.0"5.0" x 7.0"6.0" x 8.0"
Weight/Thickness1.4lbs/1.1"1.4lbs/1.1"1.9lbs/1.1"
ATT Model3610SPS3610SPM3610SPL
Weapon TypeAmmunitionStriking Velocity
Rifle M-17.62x63mm - JSP2780ft/s±30
Rifle SVD, Dragunov7.62x54R - L / LPS2850ft/s±30
Rifle FN FAL7.62x51mm - Ball2780ft/s±30
Rifle AK-477.62x39mm - Ball / Steel Core2380ft/s±30
Rifle M-16/AR-155.56x45mm - M193/M855/SS1093250ft/s±30

LEVEL III++ In-Conjunction With

  • Special AP Protection
  • (7.62x39mm API BZ)
  • These are our OCONUS Special Threat Plates!
  • Advanced Ceramic/Composite Design
  • Multi-Shot Rated
  • We are the maker of these plates !

Waiting for 0101.06 certification now

NIJ'06-Pending
SAPI Style Multi-CurveSmallMediumLargeExtra Large
Width x Length8.75" x 11.75"9.5" x 12.5"10.25" x 13.25"11.0" x 14.0"
Weight/Thickness4.6lbs/0.8"5.3lbs/0.8"6.2lbs/0.8"7.0lbs/0.8"
ATT Model3590S3590M3590L3590XL
Swimmer Style Multi-CurveSmallMediumLargeExtra Large
Width x Length9.5" x 11.1"10.0" x 11.6"10.0" x 12.1"10.5" x 12.6"
Weight/Thickness4.4lbs/0.8"4.9lbs/0.8"5.1lbs/0.8"5.6lbs/0.8"
ATT Model3590SWS3590SWM3590SWL3590SWX
Side Plate Single-CurveSmallLargeNIJ - 0101.06
Lab Tested & Verified
Width x Length6.0" x 6.0"6.0" x 8.0"
Weight/Thickness1.7lbs/0.8"2.3lbs/0.8"
ATT Model3590SPS3590SPLL
Weapon TypeAmmunitionStriking Velocity
Rifle SVD, Dragunov7.62x54R - L / LPS2850ft/s±30
Rifle FN FAL7.62x51mm - Ball2780ft/s±30
Rifle AK-47, M, SKS7.62x39mm - Ball/Steel Core/API2380ft/s±30
Rifle M-16/AR-155.56x45mm - M193/M855/SS1093250ft/s±30

LEVEL IV+ In-Conjunction With

  • Special AP Protection
  • (7.62x51mm M995, M993)
  • This is our FBI-Rated Plate
  • Lightweight Silicon Carbide Ceramic/UHMWPE Design
  • Multi-Shot Rated XSAPI Compliant
  • We are the maker of these plates !

Waiting for 0101.06 certification now

NIJ'06-Pending
SAPI Style Multi-CurveSmallMediumLargeExtra Large
Width x Length8.75" x 11.75"9.5" x 12.5"10.25" x 13.25"11.0" x 14.0"
Weight/Thickness4.7lbs/1.0"5.4lbs/1.0"6.2lbs/1.0"7.1lbs/1.0"
ATT Model4520S4520M4520L4520XL
Swimmer Style Multi-CurveSmallMediumLargeExtra Large
Width x Length9.5" x 11.1"10.0" x 11.6"10.0" x 12.1"10.5" x 12.6"
Weight/Thickness4.5lbs/1.0"4.9lbs/1.0"5.2lbs/1.0"5.7lbs/1.0"
ATT Model4520SWS4520SWM4520SWL4520SWX
Side Plate Single-CurveSmallLargeNIJ - 0101.06
Lab Tested & Verified
Width x Length6.0" x 6.0"6.0" x 8.0"
Weight/Thickness1.7lbs/1.0"2.3lbs/1.1"
ATT Model4520SPS4520SPLL
Weapon TypeAmmunitionStriking Velocity
Rifle M-17.62x63mm - JSP/AP M22850ft/s±30
Rifle SVD, Dragunov7.62x54R - L / B-32API2850ft/s±30
Rifle FN FAL7.62x51mm - M995/M9932750ft/s±30
Rifle AK-477.62x39mm - Ball/Steel Core/API2400ft/s±30
Rifle M-16/AR-155.56x45mm - M193/M855/SS1093250ft/s±30
REMEMBER
Others market and sell Level III, Level III+ & Level IV Rifle Protective Plates.
Ask them for a copy of their Lab letter.
WE MANUFACTURE MISSION-SPECIFIC SPECIAL-THREAT RIFLE PROTECTIVE PLATES ONLY
You want generic, general threat plates, don't call us !
ATT-Plates

Applied Tactical Technologies, Inc.
NIJ JustNet Listing

PO Box 268 Babylon , NY 11702
Tel: 800-223-1204  Fax: 877-839-4265
http://www.att-tactical.com/

Threat Level Model Designation Gender Opening Size Range
(Highlighted Boxes)
Warranty Model Status
II LTST-103-II  Male Side Opening C1 C2 C3 C4 C5 5 Years Active
II LTSTF-103-II  Female Side Opening C1 C2 C3 C4 C5 5 Years Active
II SLTII  Neutral Side Opening C1 C2 C3 C4 C5 5 Years Active
IIIA SLRIIIA  Neutral Side Opening C1 C2 C3 C4 C5 5 Years Active
IIIA SLTIIIA  Neutral Side Opening C1 C2 C3 C4 C5 5 Years Active
IIIA VLTF-IIIA  Female Side Opening C1 C2 C3 C4 C5 5 Years Active
IIIA VLT-IIIA  Male Side Opening C1 C2 C3 C4 C5 5 Years Active
III 3400  Neutral Single Curve Plate           5 Years Active
III 3600  Neutral Multi-curve Plate           5 Years Active
III 3610  Neutral Multi-curve Plate           5 Years Active
IV 4400  Neutral Single Curve Plate           5 Years Active
IV 4600 Neutral Multi-curve Plate           5 Year Active
 
Rifle Threat Plate-SAPI

RTPSAPI-CUT-III
Rifle Threat Plate
(This model is sized to the SAPI Dimensions)

Level III ICW - NIJ 0101.04

  • Lightweight UHMWPE
  • Made in the U.S.A.
  • Multi Curve with Shooters-Cuts
  • 1.1" thick
  • Weight: S 2.6lbs / M 2.8lbs / L 3.5lbs / XL 4.0lbs
  • Size: S 8.75x11.75" / M 9.5"x12.5" / L 10.25"x13.25" / XL 11.0"x14.0"
  • MSLP $1102.00 - $1755.00

Ultra-light Ballistic protection capable of withstanding multiple hits from
standard commercial rifle ammunition

 Laminated Polyethylene construction

Rifle Threat Plate-SAPI

RTPSAPI-CUT-IV
Rifle Threat Plate
(This model is sized to the SAPI Dimensions)

Level IV ICW - NIJ 0101.04

  •  SIC-Carborundum / UHMWPE Construction
  • Made in the U.S.A.
  • Multi Curve with Shooters-Cuts
  • 1.0" thick
  • Weight: S 5lbs / M 5.8lbs / L 6.6lbs / XL 7.6lbs
  • Size: S 8.75x11.75" / M 9.5"x12.5" / L 10.25"x13.25" / XL 11.0"x14.0"
  • MSLP $1102.00 - $1755.00

Ultra-light Ballistic protection capable of withstanding multiple hits from
standard commercial rifle ammunition + M2-AP, B-32API,AK-API & SS109

SIC Face with a Laminated Polyethylene construction

HOW TO SIZE OUR SAPI-CUT RIFLE PROTECTIVE PLATES
Before ordering, please make sure your carrier's plate pockets will take the size plates you're requesting. We cannot exchange plates nor take them back.




SAPI / ESAPI / XSAPI Plate Sizes & Weights
 Military plates meant for body armor come in front and back plates which are identical, and smaller side plates.

The front and back plates come in five standardized sizes.
Their dimensions are the following:

SAPI plates (referred to as Level 3 plates and were given to combat support troops, who rarely got shot at, but wanted some protection for those occasions.:

  • Extra Small - 1.27kg (2.8lb) | .184 x .292 m (7.25 x 11.5 in)
  • Small - 1.59kg (3.5lb) | .222 x .298 m (8.75 x 11.75 in)
  • Medium - 1.82kg (4.0lb) | .241 x .318 m (9.5 x 12.5 in)
  • Large - 2.09kg (4.6lb) | .260 x .337 m (10.12 x 13.25 in)
  • Extra Large 2.40kg (5.3lb) | .280 x .356 m (11 x 14 in)

ESAPI plates are the same size but slightly greater in weight (approx 37%) and offered enhanced protection against AP rounds found on the Middle East battlefields.

  • Extra Small - 1.70 kg (3.75 lb)
  • Small - 2.08 kg (4.60 lb)
  • Medium - 2.50 kg (5.50 lb)
  • Large - 2.85 kg (6.30 lb)
  • Extra Large - 3.25 kg (7.20 lb)

Torso side plates are as follows: 1 kg (2.3 lb) | .15 x .2 m (6 x 8 in)

XSAPI plates are the same size but slightly greater in weight than ESAPI plates (approx 26%) and were intended for newer AP threats.

Sometimes the effort to build "better" (for generals and politicians, not troops) plates backfires. Such was the case when the army bought 120,000 XSAPI bulletproof plates a few years ago. These plates were specially designed to protect against a type of bullet that the army would not reveal. The XSAPI plates weigh about ten percent more than the ESAPI plates, but are constructed of the same materials. It’s believed the XSAPI provides protection against some kind of armor piercing bullets. These were long rumored to be used by Iraqi and Afghan terrorists. But, in fact, these bullets were never encountered. So, the theory goes, the XSAPI plates were never issued, and are held in reserve, just in case. Troops have noted that they rarely encountered enemy troops using armor piercing bullets. Thus the older SAPI plates were preferred, simply because they saved a lot of weight. In fact, no one could actually produce any firm evidence of any kind of armor piercing bullets, but combat troops learned every day that weight is real, and it kills.

NlJ STANDARD FOR THE BALLISTIC RESISTANCE OF POLICE BODY ARMOR.  
-----------------------------------------------------------------------------------------
Type Ill (High -Powered Rifle)
This armor protects against the standard test round as defined in section 5.2.5. It also provides protection against lesser threats such as 223 Remington (5.56 mm FMJ), 30 Carbine FMJ, and 12 gauge rifled slug, as well as the threats mentioned in sections 2.2.1 through 2.2.4.
------------------------------------------------------------------------------------------
Type IV (Armor-Piercing Rifle)
This armor protects against the standard test round as defined in section 5.2.6. It also provides at least single hit protection against the threats mentioned in sections 2.2.1 through 2.2.5
-------------------------------------------------------------------------------------------
ESAPI protection level: *In conjunction with IIIA soft body armor
Multi hits of 7.62 x 63mm – Armor Piercing, Designated as M2. Color: Green  Weight: from 2.2lbs to 9.8lbs.

WeaponTypeAmmunitionStriking Velocity ft/s
M1 Rifle7.62x63AP M22850
FN FAL7.62x51M80/AP2750
M-16/M45.56x45M855 / M1933000 / 3250
Dragunov7.62x54RLPS/B32 API2870
 



       


Applied Tactical Technologies, Inc. PO Box 268, Babylon NY 11702-0268 USA (800)223-1204

ATT-TACTICAL™ DOES NOT SELL TO OR DEAL WITH THE CIVILIAN MARKET, INDIVIDUALS, OR FFL DEALERS.
ATT-TACTICAL™ ONLY DEALS WITH, ISSUES QUOTES TO, AND SELLS TO FEDERAL, STATE, AND LOCAL LAW ENFORCEMENT AGENCIES, IAFFILIATED GOVERNMENT AGENCIES, US MILITARY, AFFILIATED TRAINING FACILITIES (Particular item restrictions apply)


Copyright Notice
©1994-2024 Applied Tactical Technologies, Inc. All Rights Reserved in Perpetuity.
att-tactical™ Panoply™, 8-Ball™
are trademarks in continuous use since 1994. The phrase 'Bang Box' has been in continuous use by law enforcement agencies across the USA since the early 1990's and therefore is public domain. The ATT-TACTICAL name, logo and related trademarks and service marks, owned by Applied Tactical Technologies, Inc., are registered and/or used in the United States and many foreign countries.  All other trademarks, service marks and trade names referenced in this site are the property of their respective owners. ANY USE, COPYING, OR REPRODUCTION OF THE TRADEMARKS, LOGOS, INFORMATION, IMAGES OR DESIGNS CONTAINED IN THIS SITE IS STRICTLY PROHIBITED WITHOUT THE PRIOR WRITTEN PERMISSION OF APPLIED TACTICAL TECHNOLOGIES, INC.
att-tactical.com seeks to ensure that all content and information published at this Web site is current and accurate but is not warranted.

Legal Disclaimer
The information at att-tactical.com does not in any way constitute legal or professional advice and att-tactical.com cannot be held liable for actions arising from its use. we accept no liability for any loss or damages, consequential or otherwise, incurred in the reliance of the materials contained within.
ATT-Tactical does not guarantee that the information provided herein is free from errors as the BATFE is often fluid in their definitions, descriptives, interpretations, readings, understandings and/or enforcement of federal and/or state laws.

Private Use Only
In total of all content of this internet entity is not intended for public purview or examination. This is an internal information and corporate records storage device intended for viewing by agents, employees and/or representatives of this website's owner of record. No other use by anyone else is authorized. In addition, att-tactical.com cannot be held responsible for the contents of any externally linked pages or the actions taken by any entity which views this information. Any and all pricing shown is for internal use only, is not an offer to sell, deliver, send, ship or trade and subject to change without notice.  

ITAR Clause
You may access information on this site which may contain technical data as defined in the International Traffic in Arms Regulations ITAR at 22 CFR 120.10. The technical data provided comes under the purview of U.S. export regulations including the Arms Export Control Act (title 22, U.S.C., sec. 2751, et seq.) or the Export Administration Act of 1979, as amended,(title 50, U.S.C., app. 2401, et seq.).

Office of Foreign Assets Control (OFAC)  Export Administration Regulations (EAR)
By accessing this site, you acknowledge that such restricted technical data may not be exported, disclosed, or transferred to any foreign person, as defined in the ITAR at 22 CFR 120.16, without first complying with all the requirements of the ITAR (22 CFR 120-130) including requirements for obtaining any required export authority.      

Counterfeit Parts Mitigation
We are in full compliance with both the American Recovery and Reinvestment Act and the Trade Agreements Act regarding identifying, segregating and removing counterfeit parts from our supply chain. We insure our dealers and lower tier suppliers are also in compliance.

Pending Patents, Trade Marks, Copyrights and Intellectual Property
Unless otherwise noted, all materials, including all of the text, page headers, images, illustrations, graphics, photographs, written and other materials that appear as part of this Catalog (collectively, the "Content") are subject to trademark, service mark, trade dress, copyright, and/or other intellectual property rights or licenses held by Applied Tactical Technologies, Inc., one of its affiliates, or by third parties who have licensed their materials to Applied Tactical Technologies, Inc.,. Furthermore, certain products in this Catalog are subject to patent protection under patent law, including both, utility and design patent protection, as well as trade dress, copyright, and other intellectual property laws.  

Witness
The entire Content of this Catalog is copyrighted as a collective work under U.S. copyright laws, and Applied Tactical Technologies, Inc., owns a copyright in the selection, coordination, arrangement, and enhancement of the Content. The Catalog as a whole is protected by copyright and trade dress, all worldwide rights, titles and interests in and to which are owned by Applied Tactical Technologies, Inc. The Content of the Catalog, and the Catalog as a whole, are intended solely for personal, noncommercial (other than for the purchase of merchandise from this Catalog) use by the users of our Catalog. Applied Tactical Technologies, Inc., reserves complete title and full intellectual property rights in any Content you copy from this Catalog. Except as noted above, you may not copy, reproduce, modify, publish, distribute, display, transmit, transfer, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Content of this Catalog.
Search Query