ATT-TACTICAL™ATT-Tactical- Serving Warfighters and Crimefighters since 1985
US Dept. of State  ITAR / DDTC Registered  Manufacturer  / DUNS 96-648-0345  / CAGE 3BNS6
NYS Vender ID # 1000034176  / NJS Vender ID # 13262250 / GML 103
NYS Explosives Mfgr / Dealer  §478.99(d) Armor Piercing Ammunition
FAR, FAR2 and SOP 00 11 -Compliant  / WAWF - Compliant / IPP - Compliant  / BAA & TAA Compliant
Defense Contractor since 1994
Home PageAbout ATTOur MissionConversionsRefinishingArmorerTradesFAQContact

Ballistic Protective Shields (Body Bunkers)




NYPD-ESU officers equipped with our Segreti™ Ballistic Shield
place a Tremont Bronx NY Robbery suspect in custodial restraints. 09/22/2009
Hand-Held & Wheeled Ballistic Protection: All pricing shown are subject to change without notice - 08/2015
New Jersey State Contract # 74006 New York State Contract # PC67143

DEA Ballistic Shield Testing Protocol v2.0

LEVEL IIIA


Click here for more info on this ground breaking shield


WE NOW PRODUCE THE SEGRETI IN LEVEL III 
MSLP $4999
The Level IIIA / B4 Segreti Fighting Shield (SFS)
 Ballistic Shield (High-Mobility/Low-Profile)

The Segreti Fighting Shield™ ballistic shield has been designed to the exacting specifications of the senior Shield Instructor for a major northeast police department. Utilizing the latest materials technology and a handle system that has been ergonomically refined over a number of years. They are the ultimate protection against all pistol calibers as well as high velocity fragmentation. Specially positioned Viewport provides more protection for lower body without sacrificing head protection while wearing a Level IIIA helmet.
This is a fighting shield!

Dimensions SFS™: 680sq inches in a shield less than 36" tall Weight NIJ Level IIIA format. The shield itself weighs 7lbs 8oz and is the lightest shield per square inch available.
Assembled weight 12.5 lbs
Options:
Hi-Power LED Lighting 
Protective carry bag
"POLICE" logo

MSLP $2144


Level IIIA

 
Click here for more info

The Level IIIA / B4 ERT™ Ballistic Shield
(Emergency Response Team)


The ERT™ ballistic shield has been designed for Team Deployment. Utilizing the latest materials technology and a handle system that has been ergonomically refined over a number of years. They are the ultimate protection against all pistol calibers as well as high velocity fragmentation. Specially positioned Viewport provides more protection for the operator's head protection while wearing a Level IIIA helmet. This is a fighting shield!

Dimensions
ERT™          24"x36"

Weight
NIJ Level IIIA format 15.4 lbs

Options
Hi-Power LED Lighting be fixed to the middle of the shield.

MSLP $2144



Level IIIA
 
The Level IIIA / B4 Body-Shield™ 

The Body-Shield™ Ballistic Shield incorporates the latest materials technology and a handle system that has been ergonomically refined over a number of years. They are the ultimate head to toe protection against all pistol calibers as well as high-velocity fragmentation.

Dimensions
Body-Shield™            24" x 69"

Weight
NIJ Level IIIA Format   20.4lbs

Options
Hi-Power LED Lighting
 
MSLP $2699


Level III+

The facts on High-Speed and Low Speed rifle threats
The Blunting-Gap Effect, as Observed When Shooting UHMWPE Panels with Mild Steel Core Bullets:

7.62x39 Factory loadings run between 2396fps & 2421fps. FMJ (Spitzer) and Hollowpoint commercial ammunition are not a problem because they travel at sufficient speed to mushroom upon impact on shields of this type. Sub-Sonic AK Ammo, which is unavailable domestically, is what has been red-flagged as a problem for UHMWPE Ballistic Shields.  Chinese military-issue ammunition in this caliber is M43 style with a mild steel core and a thin jacket of copper or brass. Chinese ammunition (as well as all other M43 ammunition) is currently banned from importation in the U.S. because U.S. federal law classifies the round as an armor-piercing handgun round. This classification is based on materials and bullet design rather than on empirical ability to penetrate armor.

The Level III+ / B6 Poly-Shield™ Light Weight Ballistic Shield

The Poly-Shield™ level III ballistic shield is constructed from HPPE high tensile strength polyethylene and is especially designed for high performance with low weight. Defeats common non-steel core rifle rounds.

The trolley is made from box section mild steel and comprises three parts which are bolted together with three 8mm thumb screws to enable quick deployment. The two rear wheels are braked and all four solid rubber wheels have independent steering. The shield is securely mounted onto the Quad Trolley by means of parallel vertical slotted bars and can be mounted and dismounted within seconds without the need of tools.

Dimensions
Trolley-Dedicated Model   24 " X 51 "
Window size                   15.75" x 3.9"

Weight 68.5lbs

Options
Hi-Power LED Lighting be fixed to the top or middle of the shield.

MSLP - $8,240



Level IV
 

The Level IV / B8 Bara-Shield™  Ballistic Shield
*Exceeds NIJ Minimum Standards
-

The shield design originated from a police requirement to provide a Level IV shield which could also be easily carried in a standard police car. The shield enables the operator to roll the shield to the engagement site and moved to the optimum position for maximum protection in a minimum profile. The shield is constructed with an alumina oxide ceramic face bonded to an Aramid backer. The ballistic view port is rated at the same protection level as the shield body.

Dimensions
Shield
                     40" x 20"'
Window size
Large                         15" x 4"

Weight
NIJ Level IV format 108.5 lbs

Options
Hi-Power LED Lighting be fixed to the top or middle of the shield

MSLP - $11,450



Level IV+ Blast Protection

ATT-TacticalAlso available in a Folding
Model that will fit in a truck
compartment or car trunk.

The #1 Active Shooter / Active Bomber Shield !
Currently deployed with the nation's largest police agency

Battle Bunker™
Mobile Fighting Position / Level IV* Ballistic Shield

*IED Blast protective from larger than 64gr fragments (Velocity Dependant)

For use at Vehicle Check Points, Border Crossings, Embassy Entrances, and can be utilized as rolling protection when approaching a free-standing individual so equipped with a "bomb belt".

Rough terrain pneumatic tire trolley narrow enough for 36" doorways and stable enough to withstand "lite" I.E.D. overpressure and fragments typical with body-worn explosives. Not for use where vehicle-borne I.E.D.'s may be encountered.

As a Mobile Fighting Position, the Battle Bunker™ can withstand assault from multiple rounds of armor piercing NATO calibers. Effective against 7.62x39AP BZ and 7.62x54R-API-NATO AEP-55 III

*This is custom-built to our spec - Exclusive*

Ballistic polycarbonate laminate viewport Rated Level IV

Dimensions
Shield
                     80" x 32"'
Window size
Large                       28" x 24"

Weight
NIJ Level IV format w/Trolley 421 lbs

Options
Hi-Power LED Lighting be fixed to the top, middle or bottom of the shield

MSLP - $38,500  Please call for Agency Pricing









.50BMG Rated Portable Check-Point Wall
NATO AEP-55 STANAG 4569 Level IV
Cal. .50 AP, M2, 708gr Protection

Proprietary composite panels

Freestanding wall that offers protection for Checkpoint fortifications and the personnel manning it, from major rifle rounds. Intended specifically to defeat .50bmg AP and lesser threats. This in no way would provide coverage from a direct RPG hit and does not have sufficient weight to deflect a vehicle.

THIS IS A PORTABLE SYSTEM. It is movable via a Fork Truck and as an option, can be set up with wheels.
The unit can be passed through a standard 36" wide doorway if needed.
Ideal for large facilities such as nuclear power plants, oil refineries, airports and/or secured governmental buildings or installations.

Equipped with Gun ports sufficient in size to accommodate small arms and can be outfitted with .30 cal AP rated Viewport glass.





Price upon request

  • Free-Standing
  • Multiple Gun Ports
  • Movable via Fork Truck or optional wheel system
  • Optional .30AP Viewport(s)
  • Optional Ballistic Apron (prevents infiltration under shield)
  • Custom sizes available
  • Custom protection levels available
    NIJ Level IV (.30 AP, M2) Panels
    NIJ Level III (7.62mm Ball, M80, 149gr) Panels
    NIJ Level IIIA (.44 Magnum) Panels

Trailer-Bunker

Trailer Deployable
In this configuration, only slow transport speeds should be observed. The Wall will act like an air brake and once it's structural limits are reached, it will separate from the trailer with great force.
The unit is designed to fold down and lock down thereby reducing it's wind effects.

 
NIJ Standard - 0108.01 BALLISTIC RESISTANT PROTECTIVE MATERIALS
Armor TypeTest AmmunitionNominal Bullet MassSuggested Barrel LengthRequired Bullet VelocityRequired Hits Per Armor SpecimenPermitted Penetrations
I22 LRHV Lead

38 Special RN Lead
2.6g
40gr
10.2g
158gr
15 to 16.5cm
6 to 6.5in
15 to 16.5cm
6 to 6.5 in

320 ± 12m/s
1050 ± 40ft/s
259 ± 15m/s
850± 50ft/s

5

5
0

0
II-A357 Magnum JSP

9mm FMJ
10.2g
158gr
8.0g
124gr
10 to 12 cm
4 to 4.75in
10 to 12cm
4 to 4.75in
381 ± 15m/s
1250 ± 50ft/s
332 ± 12m/s
1090 ± 40ft/s
5

5
0

0
II357 Magnum JSP

9mm FMJ
10.2g
158gr
8.0g
124gr
15 to 16.5cm
6 to 6.5in
10 to 12cm
4 to 4.75in
425± 15m/s
1395 ± 50ft/s
358 ± 12 m/s
1175 ± 40ft/s
5

5
0

0
III-A44 Magnum
Lead SWC Gas
Checked
9mm FMJ
15.55g
240gr
8.0g
124gr
14 to 16cm
5.5 to 6.25in
24 to 26cm
9.5 to 10.25in
426 ± 15m/s
1400 ± 50ft/s
426 ± 15m/s
1400 ± 50ft/s
5

5
0

0
III7.62mm
308 Winchester
FMJ
9.7g
150gr
56cm
22in
838 ± 15 m/s50
IV30-06
AP
10.8 g
166 gr
56 cm
22 in
868 ± 15m/s
2850 ± 50ft/s
10
 
Australian and New Zealand Standards - AS/NZS 2343:1997 Standard
Classification of Panel
Caliber
Ammunition
*3
Measure Velocity within 2.5m of Target (m/s) *2
Minimum Range (m)
*3
Number of Strikes
Pattern of Strikes
Class G0
9mm Military
Parabellum
MK 2Z Standard 9mm
7.4g Metal Case Bullet
405 ± 15
3
3
Shot centers 100mm, (+10, -10mm) apart forming an equilateral triangle within square of 200mm per side centrally located on panel.
Class G1357 Magnum
10.2g Soft point semi-Jacketed, Flat nose
405 ± 15
3
3
Class G2
44 Magnum
15.6g Soft Point semi-Jacketed, Flat nose
480 ± 15
3
3
Class R15.56mm
M 193 5.56mm 3.6g full metal case bullet
980 ± 15
10
3
Shot centers 100mm, (+10, -10mm) apart forming an equilateral triangle within square of 200mm per side centrally located on panel.
Class R27.62mm
NATO Standard
7.62mm 9.3g full metal case bullet
850 ± 15
10
3
Class S012 Gauge (Full Choke)
12 Gauge 70mm high velocity magnum 32g SG Shot
400 ± 20
3
2
Shot Centers 100mm (+20-0mm) apart with a square of 200mm per side centrally located on panel.
Class S1
12 Gauge (Full Choke)
12 Gauge 70mm 28.35g single Slug
450 ± 20
3
2
* Class G - Simulated attack by handgun * Class R - Simulated attack by rifle
* Class S - Simulated attack by shotgun
EN Standard - European Standard EN 1063: 1999 Security Glazing Ballistic Standard
Armor TypeProjectile Caliber Cartridge Type Velocity Range No. Shots Shot Spacing No. Samples Test Temp
BR1.22 LR 40 grain Lead Round Nose 1048 to 1214 ft/sec
3
4.3 to 5.1in Triangle 355 - 73F
BR29mm Luger 124 grain Full Steel Jacket Round Nose Soft Core 1280 to 1345 ft/sec
3
4.3 to 5.1in Triangle 355 - 73F
BR3.357 Magnum 158 grain Full Steel Jacket Conned Soft Core 1378 to 1444 ft/sec
3
4.3 to 5.1in Triangle 355 - 73F
BR4.44 Magnum 240 grain Full Copper Jacket Flat Nose Soft Core 1411 to 1476 ft/sec
3
4.3 to 5.1in Triangle 355 - 73F
BR55.56 x 45 NATO (.223 Remington) 62 grain type SS109 (Steel Penetrator) 3084 to 3150 ft/sec
3
4.3 to 5.1in Triangle 355 - 73F
BR67.62 x 51 NATO (.308 Winchester) 147 grain Full Steel Jacket (M80) 2690 to 2756 ft/sec
3
4.3 to 5.1in Triangle 355 - 73F
BR77.62 x 51 NATO (.308 Winchester) 150 grain Full Copper Jacket Steel Hard Core 2657 to 2723 ft/sec
3
4.3 to 5.1in Triangle 355 - 73F
SG112 Gauge 478 grain Solid Lead Brenneke Slug (1.09 ounce) 1312 to 1444 ft/sec
1
n/a355 - 73F
SG212 Gauge 478 grain Solid Lead Brenneke Slug 1312 to 1444 ft/sec
3
4.3 to 5.1in Triangle 355 - 73F

NATO AEP-55 STANAG 4569 - Protection levels for Occupants of Logistic and Light Armored Vehicles
Level
KE Threat
Bullet
Distance
Velocity*
I
Rifle7.62 x 51 NATO Ball (Ball M80)
5.56 x 45 NATO SS109
5.56 x 45 M193

30 Meters 833m/sec (M80)
900m/sec (SS109)
937m/sec (M193)
II
Infantry Rifle7.62 x 39 API BZ
30 Meters695m/sec
III
Sniper Rifle7.62 x 51 AP (WC core)
7.62 x 54R B32 API (Dragunov)

30 Meters 930m/sec (51 AP)
854m/sec (54R)
IV
Heavy Machine Gun14.5x114AP / B32200 Meters 911m/sec
V
Automatic Cannon25mm APDS-TM-791 or TLB 073500 Meters 1258m/sec


       


Applied Tactical Technologies, Inc. PO Box 268, Babylon NY 11702-0268 USA (800)223-1204

ATT-TACTICAL™ DOES NOT SELL TO OR DEAL WITH THE CIVILIAN MARKET, INDIVIDUALS, OR FFL DEALERS.
ATT-TACTICAL ONLY DEALS WITH, ISSUES QUOTES TO, AND SELLS TO FEDERAL, STATE, AND LOCAL LAW ENFORCEMENT AGENCIES, INDIVIDUAL OFFICERS, RESERVE OFFICERS, AFFILIATED GOVERNMENT AGENCIES, US MILITARY, INDIVIDUAL MILITARY PERSONNEL, AFFILIATED TRAINING FACILITIES, FIREFIGHTERS, EMS, PROSECUTORS, DISTRICT ATTORNEYS. (Particular item restrictions apply)


Copyright Notice
©1994-2017 Applied Tactical Technologies, Inc. All Rights Reserved in Perpetuity.
att-tactical™ Panoply™ 8-Ball™
are trademarks in continuous use since 1994. The phrase 'Bang Box' has been in continuous use by law enforcement agencies across the USA since the early 1990's and therefore is public domain..The ATT-TACTICAL name, logo and related trademarks and service marks, owned by Applied Tactical Technologies, Inc., are registered and/or used in the United States and many foreign countries.  All other trademarks, service marks and trade names referenced in this site are the property of their respective owners. ANY USE, COPYING, OR REPRODUCTION OF THE TRADEMARKS, LOGOS, INFORMATION, IMAGES OR DESIGNS CONTAINED IN THIS SITE IS STRICTLY PROHIBITED WITHOUT THE PRIOR WRITTEN PERMISSION OF APPLIED TACTICAL TECHNOLOGIES, INC. att-tactical.com seeks to ensure that all content and information published at this Web site is current and accurate but is not warranted.

Legal Disclaimer
The information at att-tactical.com does not in any way constitute legal or professional advice and att-tactical.com cannot be held liable for actions arising from its use. we accept no liability for any loss or damages, consequential or otherwise, incurred in the reliance of the materials contained within.
ATT-Tactical does not guarantee that the information provided herein is free from errors as the BATFE is often fluid in their definitions, descriptives, interpretations, readings, understandings and/or enforcement of federal and/or state laws.

Private Use Only
In total of all content of this internet entity is not intended for public purview or examination. This is an internal information and corporate records storage device intended for viewing by agents, employees and/or representatives of this website's owner of record. No other use by anyone else is authorized. In addition, att-tactical.com cannot be held responsible for the contents of any externally linked pages or the actions taken by any entity which views this information. Any and all pricing shown is for internal use only, is not an offer to sell, deliver, send, ship or trade and subject to change without notice.  

ITAR Clause
You may access information on this site which may contain technical data as defined in the International Traffic in Arms Regulations ITAR at 22 CFR 120.10. The technical data provided comes under the purview of U.S. export regulations including the Arms Export Control Act (title 22, U.S.C., sec. 2751, et seq.) or the Export Administration Act of 1979, as amended,(title 50, U.S.C., app. 2401, et seq.).

Office of Foreign Assets Control (OFAC)  Export Administration Regulations (EAR)
By accessing this site, you acknowledge that such restricted technical data may not be exported, disclosed, or transferred to any foreign person, as defined in the ITAR at 22 CFR 120.16, without first complying with all the requirements of the ITAR (22 CFR 120-130) including requirements for obtaining any required export authority.      

Counterfeit Parts Mitigation
We are in full compliance with both the American Recovery and Reinvestment Act and the Trade Agreements Act regarding identifying, segregating and removing counterfeit parts from our supply chain. We insure our dealers and lower tier suppliers are also in compliance.

Pending Patents, Trade Marks, Copyrights and Intellectual Property
Unless otherwise noted, all materials, including all of the text, page headers, images, illustrations, graphics, photographs, written and other materials that appear as part of this Catalog (collectively, the "Content") are subject to trademark, service mark, trade dress, copyright, and/or other intellectual property rights or licenses held by Applied Tactical Technologies, Inc., one of its affiliates, or by third parties who have licensed their materials to Applied Tactical Technologies, Inc.,. Furthermore, certain products in this Catalog are subject to patent protection under patent law, including both, utility and design patent protection, as well as trade dress, copyright, and other intellectual property laws.  

Witness
The entire Content of this Catalog is copyrighted as a collective work under U.S. copyright laws, and Applied Tactical Technologies, Inc., owns a copyright in the selection, coordination, arrangement, and enhancement of the Content. The Catalog as a whole is protected by copyright and trade dress, all worldwide rights, titles and interests in and to which are owned by Applied Tactical Technologies, Inc. The Content of the Catalog, and the Catalog as a whole, are intended solely for personal, noncommercial (other than for the purchase of merchandise from this Catalog) use by the users of our Catalog. Applied Tactical Technologies, Inc., reserves complete title and full intellectual property rights in any Content you copy from this Catalog. Except as noted above, you may not copy, reproduce, modify, publish, distribute, display, transmit, transfer, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Content of this Catalog.
Search Query