ATT-TACTICAL™ATT-Tactical- Serving Warfighters and Crimefighters since 1985
US Dept. of State  ITAR / DDTC Registered  Manufacturer  / DUNS 96-648-0345  / CAGE 3BNS6
NYS Vender ID # 1000034176  / NJS Vender ID # 13262250 / GML 103
NYS Explosives Mfgr / Dealer  §478.99(d) Armor Piercing Ammunition
FAR, FAR2 and SOP 00 11 -Compliant  / WAWF - Compliant / IPP - Compliant  / BAA & TAA Compliant
Defense Contractor since 1994
Home PageAbout ATTOur MissionConversionsRefinishingArmorerTradesFAQContact
About us and what we do

ATT-PLS-Logo

APPLIED TACTICAL TECHNOLOGIES, INC.

NAICS 339113

(800) 223-1204
contact@att-tactical.com
http://www.att-tactical.com

DUNS 966480345

Market Value: $2,090,423,951
Those responsible for the safety of the public and the safety of their officers will do whatever they can to protect both. That means ensuring that they have what they need without compromising their individual safety when facing criminal or terror threats. It is this reason ATT-Tactical provides US Law Enforcement and our Military with the very best in technology. Next Generation equipment must provide safety, durability, performance as well as comfort. The company raises the bar for personal protection that meets the threats that dominates today’s tactical operational environments, with systems that are designed to outperform in real-world conflicts. Based on Long Island, New York, ATT-Tactical started as a small privately-held law enforcement dealer that was challenged by a simple question: how can we protect law enforcement and military personnel better? ‘When we were approaching this challenge, the first thing we did was research current technology to find out its capabilities through real world testing,’ said Jon Glazer, Director of Communications. “At the time, we had to give it credit – it did exactly what it was supposed to – save lives. Then a critical question was brought forward, “what about all the other potential threats that law enforcement and military personnel face?” So the question became: ‘could we create an all-encompassing solution that centered on maintaining the safety of operator as well as maintaining functionality?’ The answer is "YES".

Although all sections listed are active and are at least partially populated this website has been evolving as of late 1994 when it was finally launched for the first time for our group of companies. Due to the range and complexity of our equipment line, if you do not see what you are looking for or need further information please contact us with additional specific requests until we are able to fully populate the website. For live links and more information please go to the Ordnance & Equipment side bar and click on the live links For preliminary inquires, qualified operators and buyers are most welcome to contact us by e-mail with the following form provided for your convenience. It is understood that proper identification and documentation, if applicable, will be required at time of ordering depending on the equipment in question.

  •  ATT-TACTICAL / PLS
    Total Project & Process Management with an unprecedented level of dedication
     PLS - Commercial Off The Shelf (COTS) / Custom Design-Build
    It doesn't matter if you desire a product that is 100% COTS, modified-COTS, or specifically designed and built to your custom specifications, we are equipped to get you exactly what you want.
  • PLS - Custom Kit Design and Integration
    We have the experience and the knowledge to assemble MANPAC kits for SPECWAR or SWAT.
  • Provide us with an overview of your unit's mission and we will source, compile and assemble your kits from the world's best manufacturers. If preferred, kits can be assembled to your specifications. You have approval at all key decision points.
  • All our kits are delivered completely assembled and ready for deployment. Every kit is guaranteed to be 100% correct and identical. We handle everything from procurement to delivery.
  • Our motto and creed: "Knowledge has value, but Experience is priceless"
    Berry Amendment & American Recovery and Reinvestment Act (H.R. 1)
    "Kissell Amendment" Compliant
Everything from Machine Guns to Suppressors, from Flash Bangs to CS Grenades, from Entry Shotguns to Explosives, We are your support equipment specialists. We provide you with procurement planning and budgeting assistance as  well as sourcing a plethora of manufacturers and products to choose from Innovative financing of your equipment acquisitions available.

 
ATT-Tactical.Com
North American Industry
Classification System

NAICS Code 332994 -
Machine Guns / Short Rifles / Short Shotguns / Suppressors / Destructive Devices / Explosives

NAICS Code 339113 -
Ballistic Protective Equipment: Concealable Vests, Tactical Vests, Helmets, Protective Plates & Ballistic Shields


Small Business QualifierLess than 20 employees
FFL Type 10 Manufacturer of Destructive Devices and Ammunition for Destructive Devices
SOT Class Class 2 NFA Manufacturer  (62)
FFL Type 20 Manufacturer of High Explosives
NYSP Licensed Manufacturer / Dealer /Gunsmith
NYS DOL Licensed Manufacturer / Dealer High Explosives
NJ DOL LicensedDealer of Explosives
US Dept. of Commerce Imitation Firearms Exempt
US Dept. of State Manufacturer / Exporter of Defense Articles
US DOT-FMCSA Interstate Carrier of Hazardous Materials - Explosives less than 55 lbs of Div.1.1,1.2,1.3 or any quantity of Div. 1.5 material that requires placarding.

Applied Tactical Technologies, Inc. Started in 1985 as a media advisory service for weapon-related matters, the entity grew into a full-service contract weapon system manufacturer specializing in high-grade firearms for law enforcement tactical teams.
Current manufacturing facilities, located in the heart of Long Island, New York, have unlimited capabilities thanks to a plethora of support business', experienced in aircraft component manufacturing.
The ability to contract manufacture sub-components to military specifications as well as have them MIL-Test in our local DoD licensed testing facility, makes us the go-to systems provider for municipal, state and federal law enforcement agencies.


We are an SBA certified Small Business, we can help large companies meet their small business subcontracting goals by providing high-quality designs, products and components. Please contact our Prime Vendor Liaison Officer at 800-223-1204 or via e-mail Prime Vender Liaison Officer

Prime Contractors: Let us help you achieve your "Responsible Small Business Concern" qualification.

Small Business Set-Aside Program (SBSA) Contracts of $0-$2,500: No set-asides available.

  • Contracts of $2,500-$100,000: Under the set-aside program, every acquisition of supplies or services that has an anticipated dollar value between $2,500 and $100,000 (except for those acquisitions set aside for very small business concerns, as described below) is automatically reserved exclusively for small businesses.
    However, every set-aside must meet the "Rule of Two," which requires that there must be a reasonable expectation that offers will be obtained from two or more small business concerns that are competitive in terms of market prices, quality, and delivery. If only one acceptable offer is received from a responsible small business concern in response to a set-aside, the Contracting Officer is required to make an award to that firm. If no acceptable offers are received from responsible small business concerns, the set-aside will be withdrawn and the product or service, if still valid, will be solicited on an unrestricted basis. Contracts over $100,000: In addition, the Contracting Officer is required to set aside any contract over $100,000 for small businesses when there is a reasonable expectation that offers will be obtained from at least two responsible small business concerns offering the products of different small business concerns and that award will be made at fair market prices.
    Partial Set-Asides: A small business set-aside of a single acquisition or a class of acquisitions may be total or partial. The Contracting Officer is required to set aside a portion of an acquisition, except for construction, for exclusive small business participation when: A total set-aside is not appropriate. The government's purchase requirement is severable into two or more economic production runs or reasonable lots. One or more small business concerns are expected to have the technical competence and productive capacity to satisfy the set-aside portion of the requirement at a fair market price. The acquisition is not subject to simplified acquisition procedures.
    Qualified Products List (QPL): Any products on a QPL are not set-aside for small business. What's required to be awarded a set-aside contract? To get this type of contract, a business must perform at least a given percentage of the contract. This provision limits the amount of subcontracting a concern may enter into with other firms when performing these types of contracts.
    The provisions are as follow:
    Construction -- For general and heavy construction contractors, at least 15 percent of the cost of the contract, not including the cost of materials, must be performed by the prime contractor with its own employees. For special trade construction, such as plumbing, electrical, or tile work, this requirement is 25 percent. Manufacturing -- At least 50 percent of the cost of manufacturing, not including the cost of materials, must be done by the prime contractor.
    Services -- At least 50 percent of the contract cost for personnel must be performed by the prime contractor's own employees.
    Recertification Process for Long-Term Set-Asides. In an effort to improve small business contracting and make sure government goals are being met, the SBA is issuing a new regulation effective June 30, 2007, regarding size certification.

    For long-term contracts (more than five years), small businesses will have to recertify their size status after five years, and then before the execution of any contract option after that. In addition, companies that have undergone mergers or acquisitions will have to recertify their size status as well. Originally, businesses only had to certify prior to receiving a contract. The problem was, sometimes businesses grow (or merge) into larger businesses over time. So a contract that was intended only for small businesses morphs into a contract for a regular business. But the government still recognizes the contract as a "small business" contract, counting it toward fulfilling the government's procurement goals. This misleading situation skewers the true level of contracts being awarded to actual small businesses. According to the SBA, the only objective of the new regulation is to achieve better tracking of set-aside contracts, not to penalize growing businesses. In fact, if during the course of a contract our business grows out of its "small" size, there is no termination. All terms and conditions still apply. The only outcome is that the buying agency no longer gets credit for contracting with a small business, forcing the agency to work harder to meet its procurement goals. The SBA also hope the improved record-keeping will increase opportunities for small businesses.
ATT-Tactical
       


Applied Tactical Technologies, Inc. PO Box 268, Babylon NY 11702-0268 USA (800)223-1204

ATT-TACTICAL™ DOES NOT SELL TO OR DEAL WITH THE CIVILIAN MARKET, INDIVIDUALS, OR FFL DEALERS.
ATT-TACTICAL ONLY DEALS WITH, ISSUES QUOTES TO, AND SELLS TO FEDERAL, STATE, AND LOCAL LAW ENFORCEMENT AGENCIES, INDIVIDUAL OFFICERS, RESERVE OFFICERS, AFFILIATED GOVERNMENT AGENCIES, US MILITARY, INDIVIDUAL MILITARY PERSONNEL, AFFILIATED TRAINING FACILITIES, FIREFIGHTERS, EMS, PROSECUTORS, DISTRICT ATTORNEYS. (Particular item restrictions apply)


Copyright Notice
©1994-2017 Applied Tactical Technologies, Inc. All Rights Reserved in Perpetuity.
att-tactical™ Panoply™ 8-Ball™
are trademarks in continuous use since 1994. The phrase 'Bang Box' has been in continuous use by law enforcement agencies across the USA since the early 1990's and therefore is public domain..The ATT-TACTICAL name, logo and related trademarks and service marks, owned by Applied Tactical Technologies, Inc., are registered and/or used in the United States and many foreign countries.  All other trademarks, service marks and trade names referenced in this site are the property of their respective owners. ANY USE, COPYING, OR REPRODUCTION OF THE TRADEMARKS, LOGOS, INFORMATION, IMAGES OR DESIGNS CONTAINED IN THIS SITE IS STRICTLY PROHIBITED WITHOUT THE PRIOR WRITTEN PERMISSION OF APPLIED TACTICAL TECHNOLOGIES, INC. att-tactical.com seeks to ensure that all content and information published at this Web site is current and accurate but is not warranted.

Legal Disclaimer
The information at att-tactical.com does not in any way constitute legal or professional advice and att-tactical.com cannot be held liable for actions arising from its use. we accept no liability for any loss or damages, consequential or otherwise, incurred in the reliance of the materials contained within.
ATT-Tactical does not guarantee that the information provided herein is free from errors as the BATFE is often fluid in their definitions, descriptives, interpretations, readings, understandings and/or enforcement of federal and/or state laws.

Private Use Only
In total of all content of this internet entity is not intended for public purview or examination. This is an internal information and corporate records storage device intended for viewing by agents, employees and/or representatives of this website's owner of record. No other use by anyone else is authorized. In addition, att-tactical.com cannot be held responsible for the contents of any externally linked pages or the actions taken by any entity which views this information. Any and all pricing shown is for internal use only, is not an offer to sell, deliver, send, ship or trade and subject to change without notice.  

ITAR Clause
You may access information on this site which may contain technical data as defined in the International Traffic in Arms Regulations ITAR at 22 CFR 120.10. The technical data provided comes under the purview of U.S. export regulations including the Arms Export Control Act (title 22, U.S.C., sec. 2751, et seq.) or the Export Administration Act of 1979, as amended,(title 50, U.S.C., app. 2401, et seq.).

Office of Foreign Assets Control (OFAC)  Export Administration Regulations (EAR)
By accessing this site, you acknowledge that such restricted technical data may not be exported, disclosed, or transferred to any foreign person, as defined in the ITAR at 22 CFR 120.16, without first complying with all the requirements of the ITAR (22 CFR 120-130) including requirements for obtaining any required export authority.      

Counterfeit Parts Mitigation
We are in full compliance with both the American Recovery and Reinvestment Act and the Trade Agreements Act regarding identifying, segregating and removing counterfeit parts from our supply chain. We insure our dealers and lower tier suppliers are also in compliance.

Pending Patents, Trade Marks, Copyrights and Intellectual Property
Unless otherwise noted, all materials, including all of the text, page headers, images, illustrations, graphics, photographs, written and other materials that appear as part of this Catalog (collectively, the "Content") are subject to trademark, service mark, trade dress, copyright, and/or other intellectual property rights or licenses held by Applied Tactical Technologies, Inc., one of its affiliates, or by third parties who have licensed their materials to Applied Tactical Technologies, Inc.,. Furthermore, certain products in this Catalog are subject to patent protection under patent law, including both, utility and design patent protection, as well as trade dress, copyright, and other intellectual property laws.  


The entire Content of this Catalog is copyrighted as a collective work under U.S. copyright laws, and Applied Tactical Technologies, Inc., owns a copyright in the selection, coordination, arrangement, and enhancement of the Content. The Catalog as a whole is protected by copyright and trade dress, all worldwide rights, titles and interests in and to which are owned by Applied Tactical Technologies, Inc. The Content of the Catalog, and the Catalog as a whole, are intended solely for personal, noncommercial (other than for the purchase of merchandise from this Catalog) use by the users of our Catalog. Applied Tactical Technologies, Inc., reserves complete title and full intellectual property rights in any Content you copy from this Catalog. Except as noted above, you may not copy, reproduce, modify, publish, distribute, display, transmit, transfer, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Content of this Catalog.
Search Query