ATT-TACTICAL™ATT-Tactical- Serving Warfighters and Crimefighters since 1985
US Dept. of State  ITAR / DDTC Registered  Manufacturer  / DUNS 96-648-0345  / CAGE 3BNS6
NYS Vender ID # 1000034176  / NJS Vender ID # 13262250 / GML 103
NYS Explosives Mfgr / Dealer  §478.99(d) Armor Piercing Ammunition
FAR, FAR2 and SOP 00 11 -Compliant  / WAWF - Compliant / IPP - Compliant  / BAA & TAA Compliant
Defense Contractor since 1994
Home PageAbout ATTOur MissionConversionsRefinishingArmorerTradesFAQContact

Law Enforcement & Military Ballistic Head Protective Helmets


ATT-Tactical

ACH/MICH Level IIIA Ballistic Protective Helmet

Advanced Combat Helmet / Modular Integrated Communications Helmet
Mid Cut

  • Mid-Cut ears provide mid-point ear coverage with low-profile COMMS
  • Ballistic performance to NIJ 0106.01 IIIA and HP White 0401.01B
  • Fragmentation protection STANAG 2920, V50 2150 ft/s
  • Large Weight 3lbs 6oz
  • Feature the NEW foam-pad suspension system which Includes Patented Pads, Four-Point Chin Strap, Integrated Nape Pad
  • Shock absorption against low velocity impact EN397
  • Multi hit capability
  • SCOUT Level IIIA Ballistic Protective Helmet

  • High-Cut for Head-Set clearance, Square Back
  •  NVG & Rails pre-installed
  • Ballistic performance to NIJ 0106.01 IIIA and HP White 0401.01B
  • Fragmentation protection STANAG 2920, V50 2150 ft/s
  • Unique design provides for increased peripheral vision and compatibility with multiple  models of Ballistic Protective communications gear
  • Large Weight 3lbs 6oz
  • Feature the NEW foam-pad suspension system which Includes Patented Pads, Four-Point Chin Strap, Integrated Nape Pad
  • Shock absorption against low velocity impact EN397
  • Multi hit capability


  • Measure the circumference around your forehead with a cloth tape measure only. Be sure to measure: DON’T GUESS AND DON’T DO IT YOURSELF! SNUGLY – pull that tape measure snug! Measure above the eyebrow ridge Head up straight Keep the tape roughly parallel to the ground Take the WIDEST forehead circumference measurement that you get 
    SIZING NOTE: MICH helmet sizing is different from PASGT sizing - you may go up one size in the ACH helmet. Do not use your old PASGT size – Take a new measurement  When you first try it on, the MICH helmet will probably feel tight if the pads are cold. See the instruction booklet for pad placement ideas, and try on with different pad setups (everyone’s' head is different). Then wear it for a few hours to let the pads warm up and conform to your head.
    Size Head Circumference
    X-Small 21 ¼” – 21 7/8" Small 22” – 22 1/2” Medium 22 ¾” – 23 1/8”
    Large 23 ¼” – 23 ¾” X-Large 24” – 24 ¾” XX-Large 25” – 25 5/8”

    Black, Ranger Green, Coyote, and Camo Patterns available - CeraKote™ & HydroDip™ Color:
    We can (at additional cost) provide your helmets in a choice of colors and camouflage patterns.
    We use CeraKote™ H-Series finishes and can custom-cut our own stencils for the pattern of your choice.
    If you’d like your helmets in a color other than black, please contact us for pricing. Minimum number of helmets required -
    ATT-Tactical™
     
           


    Applied Tactical Technologies, Inc. PO Box 268, Babylon NY 11702-0268 USA (800)223-1204

    ATT-TACTICAL™ DOES NOT SELL TO OR DEAL WITH THE CIVILIAN MARKET, INDIVIDUALS, OR FFL DEALERS.
    ATT-TACTICAL ONLY DEALS WITH, ISSUES QUOTES TO, AND SELLS TO FEDERAL, STATE, AND LOCAL LAW ENFORCEMENT AGENCIES, INDIVIDUAL OFFICERS, RESERVE OFFICERS, AFFILIATED GOVERNMENT AGENCIES, US MILITARY, INDIVIDUAL MILITARY PERSONNEL, AFFILIATED TRAINING FACILITIES, FIREFIGHTERS, EMS, PROSECUTORS, DISTRICT ATTORNEYS. (Particular item restrictions apply)


    Copyright Notice
    ©1994-2017 Applied Tactical Technologies, Inc. All Rights Reserved in Perpetuity.
    att-tactical™ Panoply™ 8-Ball™
    are trademarks in continuous use since 1994. The phrase 'Bang Box' has been in continuous use by law enforcement agencies across the USA since the early 1990's and therefore is public domain..The ATT-TACTICAL name, logo and related trademarks and service marks, owned by Applied Tactical Technologies, Inc., are registered and/or used in the United States and many foreign countries.  All other trademarks, service marks and trade names referenced in this site are the property of their respective owners. ANY USE, COPYING, OR REPRODUCTION OF THE TRADEMARKS, LOGOS, INFORMATION, IMAGES OR DESIGNS CONTAINED IN THIS SITE IS STRICTLY PROHIBITED WITHOUT THE PRIOR WRITTEN PERMISSION OF APPLIED TACTICAL TECHNOLOGIES, INC. att-tactical.com seeks to ensure that all content and information published at this Web site is current and accurate but is not warranted.

    Legal Disclaimer
    The information at att-tactical.com does not in any way constitute legal or professional advice and att-tactical.com cannot be held liable for actions arising from its use. we accept no liability for any loss or damages, consequential or otherwise, incurred in the reliance of the materials contained within.
    ATT-Tactical does not guarantee that the information provided herein is free from errors as the BATFE is often fluid in their definitions, descriptives, interpretations, readings, understandings and/or enforcement of federal and/or state laws.

    Private Use Only
    In total of all content of this internet entity is not intended for public purview or examination. This is an internal information and corporate records storage device intended for viewing by agents, employees and/or representatives of this website's owner of record. No other use by anyone else is authorized. In addition, att-tactical.com cannot be held responsible for the contents of any externally linked pages or the actions taken by any entity which views this information. Any and all pricing shown is for internal use only, is not an offer to sell, deliver, send, ship or trade and subject to change without notice.  

    ITAR Clause
    You may access information on this site which may contain technical data as defined in the International Traffic in Arms Regulations ITAR at 22 CFR 120.10. The technical data provided comes under the purview of U.S. export regulations including the Arms Export Control Act (title 22, U.S.C., sec. 2751, et seq.) or the Export Administration Act of 1979, as amended,(title 50, U.S.C., app. 2401, et seq.).

    Office of Foreign Assets Control (OFAC)  Export Administration Regulations (EAR)
    By accessing this site, you acknowledge that such restricted technical data may not be exported, disclosed, or transferred to any foreign person, as defined in the ITAR at 22 CFR 120.16, without first complying with all the requirements of the ITAR (22 CFR 120-130) including requirements for obtaining any required export authority.      

    Counterfeit Parts Mitigation
    We are in full compliance with both the American Recovery and Reinvestment Act and the Trade Agreements Act regarding identifying, segregating and removing counterfeit parts from our supply chain. We insure our dealers and lower tier suppliers are also in compliance.

    Pending Patents, Trade Marks, Copyrights and Intellectual Property
    Unless otherwise noted, all materials, including all of the text, page headers, images, illustrations, graphics, photographs, written and other materials that appear as part of this Catalog (collectively, the "Content") are subject to trademark, service mark, trade dress, copyright, and/or other intellectual property rights or licenses held by Applied Tactical Technologies, Inc., one of its affiliates, or by third parties who have licensed their materials to Applied Tactical Technologies, Inc.,. Furthermore, certain products in this Catalog are subject to patent protection under patent law, including both, utility and design patent protection, as well as trade dress, copyright, and other intellectual property laws.  

    Witness
    The entire Content of this Catalog is copyrighted as a collective work under U.S. copyright laws, and Applied Tactical Technologies, Inc., owns a copyright in the selection, coordination, arrangement, and enhancement of the Content. The Catalog as a whole is protected by copyright and trade dress, all worldwide rights, titles and interests in and to which are owned by Applied Tactical Technologies, Inc. The Content of the Catalog, and the Catalog as a whole, are intended solely for personal, noncommercial (other than for the purchase of merchandise from this Catalog) use by the users of our Catalog. Applied Tactical Technologies, Inc., reserves complete title and full intellectual property rights in any Content you copy from this Catalog. Except as noted above, you may not copy, reproduce, modify, publish, distribute, display, transmit, transfer, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Content of this Catalog.
    Search Query